P2071 2009 Ford Fusion Code - Intake Manifold Tuning Valve Stuck Closed Bank 1
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2071 2009 Ford Fusion indicates Intake Manifold Tuning Valve Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2071 2009 Ford Fusion Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P2071 2009 Ford Fusion?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve (IMTV) harness is open or shorted
- Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2071 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2071 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2071 2009 Ford Fusion code?
Need more information on how to fix the P2071 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2071 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2071 2009 Ford Fusion Code
What does the OBDII code P2071 mean for a 2009 Ford Fusion?
P2071 indicates that the Intake Manifold Tuning (IMT) Valve on Bank 1 is stuck in the closed position, affecting engine performance.
What are the symptoms of a P2071 code in a 2009 Ford Fusion?
Symptoms may include reduced engine power, poor acceleration, decreased fuel efficiency, rough idling, or an illuminated check engine light.
What causes the P2071 code to appear?
Common causes include a faulty IMT valve, carbon buildup in the intake manifold, a damaged IMT actuator, or wiring/electrical issues.
Can I drive my 2009 Ford Fusion with a P2071 code?
While the car may still be drivable, it could experience reduced performance and fuel efficiency. Prolonged driving without addressing the issue may damage the engine.
How do I diagnose the P2071 code?
Diagnosis involves inspecting the IMT valve and actuator for damage or wear, checking for carbon buildup in the intake manifold, and testing the electrical connections and wiring.
What is the IMT valve, and why is it important?
The IMT valve controls airflow within the intake manifold to optimize engine performance at different RPMs. A stuck valve can disrupt this process, affecting efficiency and power.
How can I fix the P2071 code on my 2009 Ford Fusion?
You may need to clean or replace the IMT valve, remove carbon buildup from the intake manifold, or repair any damaged wiring or connectors.
How much does it cost to repair the P2071 code?
Repair costs can range from $150 to $500 or more, depending on whether you need to clean, repair, or replace the IMT valve or related components.
Can a dirty air filter cause the P2071 code?
While a dirty air filter may contribute to airflow issues, it is unlikely to directly cause the P2071 code. The problem typically lies with the IMT valve or intake manifold.
Is the P2071 code specific to Ford vehicles?
No, the P2071 code can appear on other makes and models with similar intake manifold systems, but the specific diagnosis and repair steps may vary.
Discuss the causes and fixes for P2071 2009 Ford Fusion OBDII Code
Code P2071 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
