P2070 2007 Ford Fusion Code - Intake Manifold Tuning Valve Stuck Open Bank 1
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2070 2007 Ford Fusion indicates Intake Manifold Tuning Valve Stuck Open Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2070 2007 Ford Fusion Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P2070 2007 Ford Fusion?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve (IMTV) harness is open or shorted
- Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2070 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2070 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2070 2007 Ford Fusion code?
Need more information on how to fix the P2070 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2070 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2070 2007 Ford Fusion Code
1. What does the OBDII code P2070 mean on a 2007 Ford Fusion?
P2070 indicates that the Intake Manifold Tuning Valve (IMTV) is stuck open on Bank 1, which may affect engine performance.
2. What are the symptoms of a P2070 code in a 2007 Ford Fusion?
Common symptoms include reduced engine performance, poor fuel economy, rough idle, hesitation during acceleration, and an illuminated check engine light.
3. What causes the P2070 code on a 2007 Ford Fusion?
Possible causes include a faulty intake manifold tuning valve, carbon buildup restricting valve movement, damaged vacuum lines, or issues with the IMTV control solenoid.
4. Can I drive my 2007 Ford Fusion with a P2070 code?
While the car may still be drivable, continuing to drive with this code can lead to reduced engine efficiency and potential long-term damage.
5. How do I fix the P2070 code on a 2007 Ford Fusion?
Repairs may include cleaning or replacing the intake manifold tuning valve, inspecting and repairing vacuum lines, or replacing the IMTV control solenoid if faulty.
6. How much does it cost to repair a P2070 code on a 2007 Ford Fusion?
Repair costs vary but typically range from $200 to $500 depending on whether the IMTV or related components need replacement.
7. Can a dirty air filter cause the P2070 code?
A dirty air filter is unlikely to cause this code, but carbon buildup in the intake manifold, often related to poor air intake maintenance, can contribute.
8. What tools are needed to diagnose a P2070 code on a 2007 Ford Fusion?
You’ll need an OBDII scanner to read and clear codes, basic hand tools, and possibly a vacuum gauge to check for leaks.
9. Does the P2070 code always mean the intake manifold tuning valve is broken?
No, the code can also be triggered by carbon buildup, electrical issues, or vacuum leaks affecting the valve's operation.
10. How do I prevent the P2070 code from recurring on my 2007 Ford Fusion?
Regular maintenance, including cleaning the intake manifold and ensuring proper vacuum line connections, can help prevent this issue from recurring.
Discuss the causes and fixes for P2070 2007 Ford Fusion OBDII Code
Code P2070 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
