P206E Lincoln Code - Intake Manifold Tuning Valve Stuck Open Bank 2
Quick Answer
The Intake Manifold Tuning Valve (IMTV) is a motorized actuated unit mounted directly to the intake manifold. Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P206E Lincoln indicates Intake Manifold Tuning Valve Stuck Open Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Tuning Valve (IMTV), Intake Manifold Tuning Valve (IMTV) harness is open or shorted, Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P206E Lincoln Description
The motorized IMTV unit will not be energized below approximately 2600 rpm or higher on some vehicles. The shutter will be in the closed position not allowing airflow blend to occur in the intake manifold. Above approximately 2600 rpm or higher, the motorized unit will be energized. The motorized unit will be commanded on by the PCM initially at a 100 percent duty cycle to move the shutter to the open position and then falling to approximately 50 percent to continue to hold the shutter open.
The Intake Manifold Tuning Valve (IMTV) system is monitored for failure during continuous, Key ON Engine OFF (KOEO), or Key ON Engine Running (KOER) self-tests. The test fails when the signal is more or less than an expected calibrated range.
What are the Possible Causes of the DTC P206E Lincoln?
- Faulty Intake Manifold Tuning Valve (IMTV)
- Intake Manifold Tuning Valve (IMTV) harness is open or shorted
- Intake Manifold Tuning Valve (IMTV) circuit poor electrical connection
- Faulty Intake Manifold Runner Control (IMRC)
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P206E Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P206E Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P206E Lincoln code?
Need more information on how to fix the P206E Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P206E Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P206E Lincoln Code
What does the OBDII code P206E mean on a Lincoln?
The P206E code indicates that the intake manifold tuning valve for Bank 2 is stuck open, affecting engine performance.
What are the symptoms of a P206E code on a Lincoln?
Symptoms may include reduced engine power, rough idle, poor fuel efficiency, and an illuminated check engine light.
What causes the P206E code to appear on a Lincoln?
Common causes include a malfunctioning intake manifold tuning valve, carbon buildup, wiring issues, or a faulty control module.
Can I drive my Lincoln with a P206E code?
Driving with this code is not recommended as it can lead to decreased performance, poor fuel economy, and potential engine damage over time.
How do I diagnose a P206E code on a Lincoln?
Diagnosis involves scanning for additional codes, inspecting the intake manifold tuning valve, checking for carbon buildup, and testing related wiring and connectors.
How can I fix the P206E code on a Lincoln?
Repairs may include cleaning or replacing the intake manifold tuning valve, repairing damaged wiring, or replacing the control module if necessary.
How much does it cost to repair a P206E code on a Lincoln?
Repair costs can range from $150 to $600 or more, depending on whether the valve needs cleaning, repair, or replacement.
What tools are needed to fix the P206E code on a Lincoln?
Tools may include an OBDII scanner, multimeter, basic hand tools, and possibly a cleaning solution for carbon buildup.
Is a software update ever needed for a P206E code on a Lincoln?
In some cases, reprogramming or updating the engine control module (ECM) may be required to resolve the issue.
Can a P206E code recur after repair?
Yes, the code can recur if the root cause, such as carbon buildup or electrical issues, is not fully addressed.
Discuss the causes and fixes for P206E Lincoln OBDII Code
Code P206E Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
