AutoCodesAudi – P205D Audi

P205D Audi Code - Reductant Tank Temperature Sensor Circuit High

Quick Answer

The Reductant Tank Temperature Sensor is a variable resistor used to measure the temperature inside the reductant tank. Common causes include Faulty Reductant Tank Temperature Sensor, Reductant Tank Temperature Sensor harness is open or shorted, Reductant Tank Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P205D Audi indicates Reductant Tank Temperature Sensor Circuit High.
Common causes
Common causes include Faulty Reductant Tank Temperature Sensor, Reductant Tank Temperature Sensor harness is open or shorted, Reductant Tank Temperature Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,591
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 21, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P205D Audi Description

The Reductant Tank Temperature Sensor is a variable resistor used to measure the temperature inside the reductant tank. The sensor is wired to the Reductant Control Module, which acquires the sensor signal and sends it to the Engine Control Module (ECM) via serial data. The Reductant Control Module supplies 5 V to the reductant temperature sensor signal circuit and a ground for the low reference circuit. The Diagnostic Trouble Code (DTC) will be set when the difference between reductant temperature sensor signal and exhaust gas temperature sensor signals is outside a calibrated range.
OBDII Code P205D Audi - Reductant Tank Temperature Sensor Circuit High - AutoCodes.com
P205D Audi Code - Reductant Tank Temperature Sensor Circuit High

What are the Possible Causes of the DTC P205D Audi?

  • Faulty Reductant Tank Temperature Sensor
  • Reductant Tank Temperature Sensor harness is open or shorted
  • Reductant Tank Temperature Sensor circuit poor electrical connection

How to Fix the DTC P205D Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P205D Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P205D Audi code?

Need more information on how to fix the P205D Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P205D Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P205D Audi Code

1. What does the OBDII code P205D mean on an Audi?

P205D indicates a "Reductant Tank Temperature Sensor Circuit High," meaning the sensor that measures the temperature of the DEF (Diesel Exhaust Fluid) tank is sending a voltage signal higher than expected.

2. What are the common symptoms of the P205D code on an Audi?

Symptoms may include the check engine light turning on, DEF system warnings, reduced engine performance, or the vehicle entering limp mode in severe cases.

3. What causes the P205D code to appear on an Audi?

Common causes include a faulty reductant tank temperature sensor, damaged wiring or connectors, a short circuit, or issues with the DEF system control module.

4. Can I still drive my Audi with a P205D code?

While the car may still be drivable, prolonged driving with this code could lead to reduced performance or further damage to the DEF system. It’s best to address the issue promptly.

5. How do I diagnose the P205D code on my Audi?

Start by inspecting the wiring and connectors for damage near the DEF tank sensor. Use a multimeter to test the sensor’s voltage and resistance, and check for related codes that might indicate other DEF system issues.

6. How can a P205D code be fixed on an Audi?

Repairs may involve replacing the reductant tank temperature sensor, repairing damaged wiring or connectors, or updating the DEF system control module software if needed.

7. How much does it cost to fix the P205D code on an Audi?

Repair costs vary but typically range from $150 to $500, depending on whether the sensor, wiring, or control module requires replacement or repair.

8. Can a faulty DEF system cause other issues besides the P205D code?

Yes, a malfunctioning DEF system can lead to poor emissions control, reduced fuel efficiency, or the vehicle entering limp mode if not addressed.

9. What tools are needed to troubleshoot the P205D code?

You’ll need an OBDII scanner, a multimeter, and potentially a wiring diagram for the reductant tank sensor circuit to properly diagnose the issue.

10. How can I prevent the P205D code from recurring?

Regularly inspect the DEF system for damage, use high-quality DEF fluid, and ensure all system updates or recalls are performed to avoid future issues.

Discuss the causes and fixes for P205D Audi OBDII Code

Code P205D Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play