P204E DODGE - Reductant Pressure Sensor Circuit Intermittent/Erratic
P204e Dodge DescriptionThe Diesel Exhaust Fluid (DEF) Pressure Sensor is a three wire sensor, integrated into the DEF Supply Pump and is not serviceable separate from the pump. The DEF Pressure Sensor monitors supply pressure to the DEF Injector. The Diesel Exhaust Fluid (DEF) Dosing Control Unit provides a 5-Volt Supply and a ground to the DEF Pressure Sensor. The sensor provides a signal to the DEF Dosing Control Unit on the DEF Pressure Sensor Signal circuit. This DEF Pressure Sensor Signal voltage changes, based on the diesel exhaust fluid pressure supplied by the DEF Supply Pump. The DEF Dosing Control Unit uses this information to vary pump speed and maintain the 130 psi (9 bar) pressure needed for proper DEF injection. The DEF Dosing Control Unit will detect a low signal voltage at low diesel exhaust fluid pressures, and a high signal voltage at high diesel exhaust fluid pressures.
The DEF Dosing Control Module will illuminate the MIL light via the Powertrain Control Module (PCM) immediately after the diagnostics runs and fails. Diesel exhaust fluid injection into the after-treatment system is disabled. The DEF Dosing Control Module will turn off the MIL light via the PCM when the monitor runs and passes in three consecutive key cycles.
Need more help?Do you need more help with the P204e Dodge code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P204E DODGE CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P204e Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks