P2049 GMC Code - Reductant Injector Control Circuit High Voltage
Quick Answer
The Reductant Injector is a component of selective catalytic reduction system used to dose the reductant fluid to the exhaust gas and participate in the reduction reactions. Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2049 GMC indicates Reductant Injector Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2049 GMC Description
What are the Possible Causes of the DTC P2049 GMC?
- Faulty Reductant Injector
- Reductant Injector harness is open or shorted
- Reductant Injector circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2049 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2049 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2049 GMC code?
Need more information on how to fix the P2049 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2049 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P2049 2014 GMC Sierra — Reductant Injector Control Circuit High Voltage
- P2049 2015 GMC Sierra — Reductant Injector Control Circuit High Voltage
- P2049 2016 GMC Sierra — Reductant Injector Control Circuit High Voltage
- P2049 2017 GMC Sierra — Reductant Injector Control Circuit High Voltage
- P2049 2018 GMC Sierra — Reductant Injector Control Circuit High Voltage
Frequently Asked Questions about P2049 GMC Code
1. What are the common symptoms of OBDII code P2049 in a GMC vehicle?
- Common symptoms may include the Check Engine Light illuminating, reduced engine performance, and potential issues with the reductant system.
2. What causes the OBDII code P2049 "Reductant Injector Control Circuit High Voltage" in a GMC vehicle?
- The code P2049 is typically triggered by a high voltage condition in the reductant injector control circuit, which may be caused by wiring issues, a faulty reductant injector, or a problem with the control module.
3. How serious is the OBDII code P2049 in a GMC vehicle?
- While the code itself may not cause immediate harm to the vehicle, it can lead to reduced fuel efficiency and increased emissions if left unresolved.
4. What are some possible DIY repair tips for code P2049 in a GMC vehicle?
- DIY repair tips may include checking the wiring harness for any damage, testing the reductant injector for proper operation, and ensuring the control module is functioning correctly.
5. Can driving with the OBDII code P2049 in a GMC vehicle cause further damage?
- Driving with the code P2049 may not cause immediate damage, but it is recommended to address the issue promptly to prevent potential problems with the reductant system in the long run.
6. How much does it typically cost to repair the OBDII code P2049 in a GMC vehicle?
- The cost of repair can vary depending on the underlying cause of the code, but it may involve replacing the reductant injector, repairing wiring issues, or reprogramming the control module.
7. Can I reset the Check Engine Light after fixing the OBDII code P2049 in a GMC vehicle?
- Yes, the Check Engine Light can be reset using an OBDII scanner after the issue triggering the code P2049 has been resolved.
8. Will the OBDII code P2049 in a GMC vehicle cause the vehicle to fail emissions testing?
- Yes, if the code P2049 is present, it may cause the vehicle to fail emissions testing due to increased emissions from the reductant system malfunction.
9. Is it safe to continue driving my GMC vehicle with the OBDII code P2049?
- It is generally safe to drive the vehicle with the code P2049, but it is recommended to address the issue promptly to avoid potential issues with fuel efficiency and emissions.
10. How can I prevent the OBDII code P2049 from appearing in my GMC vehicle in the future?
- Regular maintenance, such as checking the reductant system components and addressing any warning signs early, can help prevent the recurrence of the code P2049.
Discuss the causes and fixes for P2049 GMC OBDII Code
Code P2049 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
