AutoCodesGMC – P2032 GMC

P2032 GMC Code - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage

Quick Answer

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P2032 GMC indicates Exhaust Gas Temperature Sensor 2 Circuit Low Voltage.
Common causes
Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,273
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 03, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2032 GMC Description

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Exhaust temperature sensor 1 is the first exhaust temperature sensor in the exhaust system, the following exhaust temperature sensors are counted upward from the engine outlet to the exhaust system end. The Engine Control Module (ECM) supplies 5 V to the exhaust gas temperature signal circuit and supplies a ground to the low reference circuit. The exhaust gas temperature sensor temperature information is used by the ECM during the exhaust gas particulate filter cleaning process. The Diagnostic Trouble Code (DTC) will ve set when the ECM detects that the exhaust gas temperature sensor is less than 158 Ω for greater than 2 s.
OBDII Code P2032 GMC - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage - AutoCodes.com
P2032 GMC Code - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage

What are the Possible Causes of the DTC P2032 GMC?

  • Faulty Exhaust Gas Temperature Sensor (EGTS) 2
  • Exhaust Gas Temperature Sensor 2 harness is open or shorted
  • Exhaust Gas Temperature Sensor 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P2032 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2032 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2032 GMC code?

Need more information on how to fix the P2032 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2032 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2032 GMC Code

No Frequently Asked Questions about P2032 GMC Code found.

Discuss the causes and fixes for P2032 GMC OBDII Code

Code P2032 GMC comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play