AutoCodes – Chevrolet – P2032 2016 Chevrolet Silverado

P2032 2016 Chevrolet Silverado Code - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage

Quick Answer

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P2032 2016 Chevrolet Silverado indicates Exhaust Gas Temperature Sensor 2 Circuit Low Voltage.
Common causes: Common causes include Faulty Exhaust Gas Temperature Sensor (EGTS) 2, Exhaust Gas Temperature Sensor 2 harness is open or shorted, Exhaust Gas Temperature Sensor 2 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 214

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 03, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2032 2016 Chevrolet Silverado Description

The Exhaust Gas Temperature sensors (EGTS) are variable resistors that measure the temperature of the exhaust gas. Exhaust temperature sensor 1 is the first exhaust temperature sensor in the exhaust system, the following exhaust temperature sensors are counted upward from the engine outlet to the exhaust system end. The Engine Control Module (ECM) supplies 5 V to the exhaust gas temperature signal circuit and supplies a ground to the low reference circuit. The exhaust gas temperature sensor temperature information is used by the ECM during the exhaust gas particulate filter cleaning process. The Diagnostic Trouble Code (DTC) will ve set when the ECM detects that the exhaust gas temperature sensor is less than 158 Ω for greater than 2 s.

OBDII Code P2032 2016 Chevrolet Silverado - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage - AutoCodes.com — P2032 2016 Chevrolet Silverado Code - Exhaust Gas Temperature Sensor 2 Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2032 2016 Chevrolet Silverado?

Faulty Exhaust Gas Temperature Sensor (EGTS) 2
Exhaust Gas Temperature Sensor 2 harness is open or shorted
Exhaust Gas Temperature Sensor 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2032 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

After starting the engine, the exhaust gas temperature sensor temperature should rise steadily, then stabilize after the engine reaches operating temperature. Exhaust gas temperature sensors may fail intermittently while operating under extreme temperatures. Review the Freeze Frame/Failure Records to verify the failure criteria.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2032 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2032 2016 Chevrolet Silverado code?

Need more information on how to fix the P2032 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2032 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2032 2016 Chevrolet Silverado Code

What does the OBDII code P2032 mean on a 2016 Chevrolet Silverado?

The P2032 code indicates that the Exhaust Gas Temperature (EGT) Sensor 2 is reporting a low voltage signal, which may mean the sensor is not functioning properly or the circuit is experiencing an issue.

What are the symptoms of code P2032 on a 2016 Chevrolet Silverado?

Common symptoms include an illuminated check engine light, reduced fuel efficiency, poor engine performance, or the vehicle entering limp mode in some cases.

What causes the P2032 code to appear?

Possible causes include a faulty EGT sensor, damaged wiring or connectors, corrosion in the circuit, a short in the wiring, or issues with the engine control module (ECM).

Can I drive my 2016 Chevrolet Silverado with the P2032 code?

While the vehicle may still be driveable, driving with this code could lead to increased emissions, reduced performance, and potential damage to the exhaust or aftertreatment system.

Where is Exhaust Gas Temperature Sensor 2 located?

On a 2016 Chevrolet Silverado, EGT Sensor 2 is typically located in the exhaust system downstream of the diesel particulate filter (DPF) or catalytic converter.

How do I diagnose the P2032 code on my Silverado?

Start by inspecting the wiring and connectors for damage or corrosion, then use a multimeter to test the sensorâ€™s voltage. A scan tool can also help monitor live data from the sensor to confirm its operation.

How do I fix the P2032 code on a 2016 Chevrolet Silverado?

Repairs may include replacing the faulty EGT sensor, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM if necessary.

How much does it cost to fix a P2032 code?

Repair costs can vary, but replacing the EGT sensor typically ranges from $150 to $300, including parts and labor. Wiring repairs may cost less if no sensor replacement is needed.

Can a faulty EGT sensor damage my engine or exhaust system?

Yes, a faulty EGT sensor can lead to improper exhaust system operation, potentially causing damage to components like the DPF, catalytic converter, or turbocharger over time.

Do I need a professional mechanic to fix the P2032 code?

While some experienced DIYers can handle sensor replacement, diagnosing wiring or ECM issues may require advanced tools and expertise, so a professional mechanic is recommended in those cases.