AutoCodes – Jeep – P2021 Jeep

P2021 Jeep Code - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 2

Quick Answer

The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2021 Jeep indicates Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 2.
Common causes: Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,695

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2021 Jeep Description

The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. The valve restricts air flow, causing it to tumble or swirl. The tumbling action helps ensure that the fuel and air mix thoroughly and burn faster. The intake manifold flow control valve and variable valve timing work together to improve fuel economy, idle stability, and emissions. The Engine Control Module (ECM) monitors the Intake Manifold Runner Position Sensor/Switch. The ECM sets the OBDII code when the Intake Manifold Runner Position Sensor/Switch is not to factory specifications.

OBDII Code P2021 Jeep - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 2 - AutoCodes.com — P2021 Jeep Code - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 2

What does this mean?

What are the Possible Causes of the DTC P2021 Jeep?

Faulty Intake Manifold Runner Position Sensor/Switch
Intake Manifold Runner Position Sensor/Switch harness is open or shorted
Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
Mechanical concern
bind, seize, damage, or obstruction of IMRC hardware

How to Fix the DTC P2021 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2021 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2021 Jeep code?

Need more information on how to fix the P2021 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2021 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2021 Jeep Code

1. What does the OBDII code P2021 mean on a Jeep?

P2021 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Low on Bank 2, which monitors the position of the intake manifold runner.

2. What are the common symptoms of code P2021 in a Jeep?

Symptoms may include reduced engine performance, poor fuel economy, rough idling, hesitation during acceleration, and an illuminated check engine light.

3. What causes code P2021 on a Jeep?

Common causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, carbon buildup in the intake manifold, or a malfunctioning intake manifold runner control valve.

4. Can I drive my Jeep with a P2021 code?

While it may be possible to drive with this code, it is not recommended as it can lead to reduced engine performance and potential long-term engine damage.

5. How is the P2021 code diagnosed on a Jeep?

A mechanic typically uses a scan tool to confirm the code, visually inspects the wiring and connectors, tests the intake manifold runner position sensor, and checks for carbon buildup in the intake manifold.

6. How do you fix code P2021 on a Jeep?

Repairs may include cleaning or replacing the intake manifold runner position sensor, repairing damaged wiring, cleaning carbon deposits, or replacing the intake manifold runner control valve.

7. What tools are needed to fix a P2021 code?

Common tools include a diagnostic scan tool, multimeter, basic hand tools, and possibly a carbon cleaning kit if buildup is present.

8. How much does it cost to repair a P2021 code on a Jeep?

Repair costs vary depending on the issue. Sensor replacement can cost $100-$300, while intake manifold repairs or replacements can exceed $500, depending on labor and parts.

9. Can a dirty intake manifold cause a P2021 code?

Yes, carbon buildup or debris in the intake manifold can interfere with the runner's movement and trigger the P2021 code.

10. How can I prevent the P2021 code from occurring on my Jeep?

Regular maintenance, including intake manifold cleaning and inspecting electrical connections, can help prevent issues related to the intake manifold runner system.