P2020 2010 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2020 2010 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2020 2010 Ford Fusion Description
What are the Possible Causes of the DTC P2020 2010 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2020 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2020 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2020 2010 Ford Fusion code?
Need more information on how to fix the P2020 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2020 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2020 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P2020 on a 2010 Ford Fusion?
The common symptoms of code P2020 may include decreased engine performance, rough idling, and the illumination of the check engine light.
2. What does the OBDII code P2020 for a 2010 Ford Fusion indicate?
Code P2020 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 2.
3. What are the possible causes of OBDII code P2020 on a 2010 Ford Fusion?
Possible causes of code P2020 can include a faulty intake manifold runner position sensor/switch, wiring issues, or a problem with the intake manifold itself.
4. How can I diagnose the source of OBDII code P2020 on my 2010 Ford Fusion?
To diagnose code P2020, you may need to perform a visual inspection of the intake manifold components, test the sensor/switch using a multimeter, and check for any wiring faults.
5. Can I continue driving my 2010 Ford Fusion with OBDII code P2020?
It is not recommended to continue driving with code P2020 as it can lead to decreased engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P2020 on my 2010 Ford Fusion?
Repairing code P2020 may involve replacing the faulty intake manifold runner position sensor/switch, repairing any damaged wiring, or addressing issues with the intake manifold.
7. Is it possible to reset OBDII code P2020 on a 2010 Ford Fusion without fixing the underlying issue?
While you can clear the code using an OBDII scanner, it is essential to address the root cause of the problem to prevent the code from reoccurring.
8. Can a DIY enthusiast fix OBDII code P2020 on a 2010 Ford Fusion?
Depending on your experience and tools available, you may be able to address code P2020 yourself by following repair guides or seeking assistance from online forums.
9. How long does it typically take to repair OBDII code P2020 on a 2010 Ford Fusion?
The repair time for code P2020 can vary based on the exact cause of the issue and your expertise. It may range from a few hours to a full day.
10. Will fixing OBDII code P2020 on a 2010 Ford Fusion improve fuel efficiency?
Addressing code P2020 can potentially improve fuel efficiency by restoring proper engine performance and combustion processes.
Discuss the causes and fixes for P2020 2010 Ford Fusion OBDII Code
Code P2020 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
