AutoCodes – Lincoln – P2019 Lincoln

P2019 Lincoln Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2

Quick Answer

The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2019 Lincoln indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 2.
Common causes
Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,477
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2019 Lincoln Description

The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Each code distinguishes the corresponding bank for IMRC actuator assemblies with dual monitor switches. The test fails when the signal on the monitor pin is outside an expected calibrated range.
OBDII Code P2019 Lincoln - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2 - AutoCodes.com
P2019 Lincoln Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2

What are the Possible Causes of the DTC P2019 Lincoln?

  • Intake manifold runner control monitor circuit open
  • Mechanical concern
  • bind, seize, damage or obstruction of IMRC hardware

How to Fix the DTC P2019 Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2019 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2019 Lincoln code?

Need more information on how to fix the P2019 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2019 Lincoln code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2019 Lincoln Code

What does the OBDII code P2019 mean for a Lincoln vehicle?

P2019 indicates an issue with the Intake Manifold Runner Position Sensor or Switch Circuit on Bank 2. This sensor monitors the position of the intake manifold runner to optimize airflow and engine performance.

What are the common symptoms of code P2019 in a Lincoln?

Symptoms may include reduced engine performance, poor fuel economy, rough idling, and the Check Engine Light being illuminated.

What causes the P2019 code to appear in a Lincoln?

Potential causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, a stuck intake manifold runner, or carbon buildup in the intake manifold.

Is it safe to drive a Lincoln with the P2019 code active?

While the vehicle may still be drivable, ignoring this code can lead to reduced performance and fuel efficiency. Long-term operation may cause further damage to the intake manifold system.

How can the P2019 code be diagnosed?

Diagnosis typically involves inspecting the intake manifold runner sensor, checking for wiring or connector damage, testing sensor voltage, and scanning for additional related codes.

Can a dirty intake manifold cause the P2019 code?

Yes, carbon buildup or dirt in the intake manifold can restrict the movement of the runners, triggering this code.

How can the P2019 code be fixed in a Lincoln?

Repairs may involve replacing the intake manifold runner position sensor, cleaning the intake manifold, repairing damaged wiring, or replacing the intake manifold runner itself.

How much does it cost to fix the P2019 code on a Lincoln?

Repair costs vary, but replacing the intake manifold runner position sensor can range from $100 to $300, excluding labor. Cleaning or repairing the intake manifold may add to the cost.

Does the P2019 code affect both banks of the engine?

No, the P2019 code specifically relates to Bank 2, which is the side of the engine opposite Bank 1.

Can I clear the P2019 code without fixing the issue?

You can clear the code temporarily using an OBDII scanner, but the issue will likely return unless the underlying problem is addressed.

Discuss the causes and fixes for P2019 Lincoln OBDII Code

Code P2019 Lincoln comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play