AutoCodes – Dodge – P2019 Dodge

P2019 Dodge Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2

Quick Answer

The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2019 Dodge indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 2.
Common causes: Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,855

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 18, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2019 Dodge Description

The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. The valve restricts air flow, causing it to tumble or swirl. The tumbling action helps ensure that the fuel and air mix thoroughly and burn faster. The intake manifold flow control valve and variable valve timing work together to improve fuel economy, idle stability, and emissions. The Engine Control Module (ECM) monitors the Intake Manifold Runner Position Sensor/Switch. The ECM sets the OBDII code when the Intake Manifold Runner Position Sensor/Switch is not to factory specifications.

OBDII Code P2019 Dodge - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2 - AutoCodes.com — P2019 Dodge Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 2

What does this mean?

What are the Possible Causes of the DTC P2019 Dodge?

Faulty Intake Manifold Runner Position Sensor/Switch
Intake Manifold Runner Position Sensor/Switch harness is open or shorted
Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
Mechanical concern
bind, seize, damage, or obstruction of IMRC hardware

How to Fix the DTC P2019 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2019 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2019 Dodge code?

Need more information on how to fix the P2019 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2019 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.