AutoCodes – Toyota – P2017 Toyota

P2017 Toyota Code - Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1

Quick Answer

The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2017 Toyota indicates Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1.
Common causes: Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,163

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2017 Toyota Description

The Tumble Control Valve (TCV) is built into the intake manifold. The Intake Air Control Valve Actuator (For Tumble Control Valve) is composed of a position sensor and a DC motor. The DC motor opens and closes the tumble control valve in response to signals from the Engine Control Module (ECM). The Tumble Control Valve Position Sensor is a non-contact type sensor. The position sensor measures the opening angle of the tumble control valve. The sensor is reliable and accurate, as it is electrically controlled by Hall-effect elements. The Diagnostic Trouble Code (DTC) will be set when the Tumble Control Valve Position Sensor output voltage is higher than 4.8 V for more than 0.5 seconds (open).

OBDII Code P2017 Toyota - Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1 - AutoCodes.com — P2017 Toyota Code - Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1

What does this mean?

What are the Possible Causes of the DTC P2017 Toyota?

Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
Tumble Control Valve Position Sensor harness is open or shorted
Tumble Control Valve Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2017 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2017 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2017 Toyota code?

Need more information on how to fix the P2017 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2017 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

P2017 2006 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2007 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2008 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2009 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2010 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2011 Toyota Camry — Intake Manifold Runner Position Sensor/Switch Circuit High Bank 1
P2017 2013 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
P2017 2014 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
P2017 2015 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
P2017 2016 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
P2017 2017 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1
P2017 2018 Toyota RAV4 — Intake Manifold Runner Position Sensor / Switch Circuit High Bank 1

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.