AutoCodes – Ford – P2017 Ford

P2017 Ford Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Quick Answer

The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2017 Ford indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
Common causes: Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,185

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2017 Ford Description

The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Each code distinguishes the corresponding bank for IMRC actuator assemblies with dual monitor switches. The test fails when the signal on the monitor pin is outside an expected calibrated range.

OBDII Code P2017 Ford - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 - AutoCodes.com — P2017 Ford Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P2017 Ford?

Intake manifold runner control monitor circuit open
Mechanical concern
bind, seize, damage or obstruction of IMRC hardware

How to Fix the DTC P2017 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2017 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2017 Ford code?

Need more information on how to fix the P2017 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2017 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.