AutoCodes – Toyota – P2016 2016 Toyota RAV4

P2016 2016 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1

Quick Answer

The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2016 2016 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1.
Common causes: Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 476

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2016 2016 Toyota RAV4 Description

The Tumble Control Valve (TCV) is built into the intake manifold. The Intake Air Control Valve Actuator (For Tumble Control Valve) is composed of a position sensor and a DC motor. The DC motor opens and closes the tumble control valve in response to signals from the Engine Control Module (ECM). The Tumble Control Valve Position Sensor is a non-contact type sensor. The position sensor measures the opening angle of the tumble control valve. The sensor is reliable and accurate, as it is electrically controlled by Hall-effect elements. The Diagnostic Trouble Code (DTC) will be set when the Tumble Control Valve Position Sensor output voltage is less than 0.2 V for more than 0.5 seconds (short).

OBDII Code P2016 2016 Toyota RAV4 - Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1 - AutoCodes.com — P2016 2016 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1

What does this mean?

What are the Possible Causes of the DTC P2016 2016 Toyota RAV4?

Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
Tumble Control Valve Position Sensor harness is open or shorted
Tumble Control Valve Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2016 2016 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2016 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2016 2016 Toyota RAV4 code?

Need more information on how to fix the P2016 2016 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2016 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2016 2016 Toyota RAV4 Code

1. What are common symptoms of OBDII code P2016 in a 2016 Toyota RAV4?

The common symptoms of P2016 include reduced engine performance, rough idling, and a possible decrease in fuel efficiency.

2. What does the OBDII code P2016 "Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1" mean?

This code indicates a potential issue with the intake manifold runner position sensor or switch circuit on bank 1 of the engine in the 2016 Toyota RAV4.

3. What are possible causes of OBDII code P2016 in a 2016 Toyota RAV4?

Possible causes of P2016 include a faulty intake manifold runner position sensor, damaged wiring or connectors, a vacuum leak, or an issue with the intake manifold itself.

4. How can I diagnose the OBDII code P2016 in my 2016 Toyota RAV4?

Diagnosing P2016 typically involves checking the intake manifold runner position sensor, inspecting wiring and connectors for damage, testing for vacuum leaks, and using a diagnostic scan tool to gather data from the sensor.

5. Can I drive my 2016 Toyota RAV4 with OBDII code P2016?

It is not recommended to drive the vehicle with P2016 as it can lead to further engine issues and potential damage. It's best to address the problem promptly.

6. How do I repair OBDII code P2016 in my 2016 Toyota RAV4?

Repairing P2016 may involve replacing the intake manifold runner position sensor, repairing damaged wiring or connectors, fixing any vacuum leaks, or addressing issues with the intake manifold itself.

7. Is it possible to reset the OBDII code P2016 in a 2016 Toyota RAV4?

Resetting the code may temporarily clear the warning light, but if the underlying issue causing P2016 is not fixed, the code is likely to reappear during driving.

8. Can a DIY enthusiast fix OBDII code P2016 in a 2016 Toyota RAV4?

Depending on the level of expertise, a DIY enthusiast may be able to address P2016 by following repair guides, but it's recommended to consult with a professional mechanic for accurate diagnosis and repair.

9. How much does it cost to fix OBDII code P2016 in a 2016 Toyota RAV4?

The cost of fixing P2016 can vary based on the specific cause of the issue and labor rates in your area. Generally, it can range from a couple of hundred to a few hundred dollars.

10. Will OBDII code P2016 cause my 2016 Toyota RAV4 to fail an emissions test?

Yes, if the issue causing P2016 is not addressed, it can result in a failed emissions test due to increased emissions and improper engine performance.