P2016 2013 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2016 2013 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Low Bank 1.
- Common causes
- Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2016 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC P2016 2013 Toyota RAV4?
- Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
- Tumble Control Valve Position Sensor harness is open or shorted
- Tumble Control Valve Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2016 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2016 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2016 2013 Toyota RAV4 code?
Need more information on how to fix the P2016 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2016 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2016 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2016 in a 2013 Toyota RAV4?
The common symptoms include rough idling, decreased engine performance, and the illumination of the Check Engine Light.
2. What does the OBDII code P2016 on a 2013 Toyota RAV4 indicate?
The code P2016 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1.
3. What are the possible causes of OBDII code P2016 in a 2013 Toyota RAV4?
Potential causes include a faulty intake manifold runner position sensor/switch, damaged wiring or connectors, or a problem with the intake manifold itself.
4. How can I diagnose the issue related to code P2016 on my 2013 Toyota RAV4?
Diagnosing the problem involves checking the intake manifold runner position sensor/switch for proper operation, inspecting the wiring for any damage, and verifying the intake manifold's condition.
5. Can I continue to drive my 2013 Toyota RAV4 with the P2016 trouble code?
It is recommended not to drive the vehicle extensively with the code P2016 present, as it can lead to decreased engine performance and potential damage if left unresolved.
6. How can I repair the Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1 issue in my 2013 Toyota RAV4?
Repairing the issue may involve replacing the faulty sensor/switch, repairing or replacing damaged wiring or connectors, or addressing any underlying intake manifold problems.
7. Is it possible to reset the OBDII code P2016 in a 2013 Toyota RAV4 without fixing the issue?
Resetting the code without addressing the underlying problem will only temporarily turn off the Check Engine Light and will not resolve the actual issue causing the P2016 code.
8. Are there any DIY tips for troubleshooting the P2016 code in a 2013 Toyota RAV4?
DIY troubleshooting tips include visually inspecting the intake manifold runner position sensor/switch, checking for loose or damaged wiring, and ensuring the intake manifold components are functioning correctly.
9. Will fixing the OBDII code P2016 on a 2013 Toyota RAV4 improve fuel efficiency?
Addressing the P2016 code can help restore optimal engine performance, potentially leading to improved fuel efficiency in the long run.
10. How long does it typically take to repair the Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1 issue in a 2013 Toyota RAV4?
The repair time can vary depending on the exact cause of the problem, but it may take a few hours to complete the necessary diagnostics and repairs.
Discuss the causes and fixes for P2016 2013 Toyota RAV4 OBDII Code
Code P2016 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
