AutoCodes – Dodge – P2016 2008 Dodge Charger

P2016 2008 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit Low

Quick Answer

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2016 2008 Dodge Charger indicates Short Runner Valve Position Sensor/Switch Circuit Low .
Common causes: Common causes include Faulty Short Runner Valve (SRV) Assembly, Short Runner Valve (SRV) Assembly harness is open or shorted, Short Runner Valve (SRV) Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,534

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2016 2008 Dodge Charger Description

The engine performance and power output is enhanced through the use of the Short Runner Valve (SRV) system. The SRV system allows the intake charge air to bypass the long intake manifold runners between the intake manifold plenum and the intake manifold interface to the cylinder heads by providing a shorter runner directly between the plenum and the cylinder head interface The SRV position is controlled by a pneumatic/spring actuator and electronic solenoid valve. When the solenoid is not energized (the rest position), the SRV is held in the closed position. When the solenoid is energized the SRV is moved and held in its opened position. There is a set of enable conditions including a minimum engine coolant and ambient temperature, SRV enable, and Powertrain Coordinator load enable condition. If any of these conditions are not met, then the SRV is de-energized (closed). The DTC will be set when the Powertrain Control Module (PCM) detects that the PWM signal from the SRV Position sensor is below the minimum acceptable value.

OBDII Code P2016 2008 Dodge Charger - Short Runner Valve Position Sensor/Switch Circuit Low - AutoCodes.com — P2016 2008 Dodge Charger Code - Short Runner Valve Position Sensor/Switch Circuit Low

What does this mean?

What are the Possible Causes of the DTC P2016 2008 Dodge Charger?

Faulty Short Runner Valve (SRV) Assembly
Short Runner Valve (SRV) Assembly harness is open or shorted
Short Runner Valve (SRV) Assembly circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2016 2008 Dodge Charger?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2016 2008 Dodge Charger code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2016 2008 Dodge Charger code?

Need more information on how to fix the P2016 2008 Dodge Charger code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2016 2008 Dodge Charger code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2016 2008 Dodge Charger Code

1. What are the common symptoms of OBDII code P2016 in a 2008 Dodge Charger?

The common symptoms include rough idling, engine misfires, reduced power and acceleration, and the illumination of the Check Engine Light.

2. What does the OBDII code P2016 "Short Runner Valve Position Sensor/Switch Circuit Low" mean for a 2008 Dodge Charger?

This code indicates that the Engine Control Module (ECM) has detected a low voltage condition in the circuit related to the Short Runner Valve Position Sensor or Switch.

3. What are the possible causes of OBDII code P2016 in a 2008 Dodge Charger?

The possible causes include a faulty Short Runner Valve Position Sensor/Switch, damaged wiring or connectors in the circuit, a malfunctioning ECM, or a vacuum leak in the intake system.

4. How can I diagnose the OBDII code P2016 in my 2008 Dodge Charger?

Diagnosing this code involves checking the wiring and connectors for any damage, testing the Short Runner Valve Position Sensor/Switch for proper operation, and ensuring there are no vacuum leaks in the intake system.

5. Can I drive my 2008 Dodge Charger with the OBDII code P2016?

It is not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potentially cause further damage if left unresolved.

6. How can I repair OBDII code P2016 in my 2008 Dodge Charger?

Repairing this code typically involves replacing the faulty Short Runner Valve Position Sensor/Switch, repairing any damaged wiring or connectors, and clearing the code with a scan tool.

7. Will resetting the Check Engine Light resolve OBDII code P2016 in my 2008 Dodge Charger?

Resetting the Check Engine Light may temporarily turn it off, but if the underlying issue causing the code is not fixed, the light is likely to come back on.

8. Can a DIY enthusiast fix OBDII code P2016 in a 2008 Dodge Charger?

While some repairs related to this code can be done by DIY enthusiasts, diagnosing and repairing electrical issues like this may require specialized tools and knowledge, so consulting a professional mechanic is advisable.

9. How much does it cost to repair OBDII code P2016 in a 2008 Dodge Charger?

The cost of repairing this code can vary depending on the cause of the issue, but it may involve replacing the sensor or switch, which can range from $100 to $250, not including labor costs.

10. How soon should I address OBDII code P2016 in my 2008 Dodge Charger?

It is recommended to address this code as soon as possible to prevent any further damage to the engine and ensure optimal vehicle performance.