P2016 2007 Toyota Camry Code - Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2016 2007 Toyota Camry indicates Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2016 2007 Toyota Camry Description
What are the Possible Causes of the DTC P2016 2007 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2016 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2016 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2016 2007 Toyota Camry code?
Need more information on how to fix the P2016 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2016 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2016 2007 Toyota Camry Code
What does the OBDII code P2016 indicate for a 2007 Toyota Camry?
The P2016 code indicates that the intake manifold runner position sensor/switch circuit has a low signal for Bank 1, which can affect engine performance and efficiency.
What are the common symptoms associated with the P2016 code?
Common symptoms include a check engine light, rough idling, decreased fuel efficiency, reduced engine power, and poor acceleration.
What could cause the P2016 code to trigger in a 2007 Toyota Camry?
Causes can include a faulty intake manifold runner position sensor, a wiring issue (like a short or open circuit), a stuck intake manifold runner, or problems with the engine control unit (ECU).
How can I diagnose the P2016 code?
To diagnose the P2016 code, start with a visual inspection of the wiring and connectors related to the intake manifold runner position sensor, check for any vacuum leaks, and use a scan tool to monitor the sensor's performance while the engine is running.
What are some repair tips for fixing the P2016 code?
Repair tips include replacing a faulty intake manifold runner position sensor, repairing any damaged wiring or connectors, ensuring the intake manifold runners are functioning properly, and clearing the code to see if it returns after repairs.
Can I drive my 2007 Toyota Camry with the P2016 code?
While you can drive the vehicle, it is not recommended as the performance issues can worsen and could lead to further damage or reduced fuel efficiency.
Will clearing the P2016 code fix the problem?
Clearing the code will not fix the underlying issue. It may temporarily turn off the check engine light, but the code is likely to return if the problem is not addressed.
How much does it typically cost to repair the P2016 code?
Repair costs can vary widely, typically ranging from $100 to $500, depending on the cause of the issue and whether it requires simple repairs or part replacements.
Is the P2016 code specific to the 2007 Toyota Camry?
No, while it is reported for the 2007 Toyota Camry, the P2016 code can appear in other vehicles with similar engine configurations, particularly those with variable intake manifold systems.
What should I do if I’m not comfortable diagnosing the P2016 code myself?
If you're not comfortable diagnosing the P2016 code yourself, it's best to take your vehicle to a qualified mechanic or dealership who can perform a thorough diagnostic and recommend the necessary repairs.
Discuss the causes and fixes for P2016 2007 Toyota Camry OBDII Code
Code P2016 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
