P2015 Mercury Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2015 Mercury indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2015 Mercury Description
What are the Possible Causes of the DTC P2015 Mercury?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2015 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
2006 Mercury Mountaineer Factory Service Bulletin OBDII Code P2015
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2015 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2015 Mercury code?
Need more information on how to fix the P2015 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2015 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2015 Mercury Code
1. What are the common symptoms of OBDII code P2015 in a Mercury related to the Intake Manifold Runner Position Sensor/Switch Circuit?
- Common symptoms include rough idling, engine hesitation, decreased fuel efficiency, and the Check Engine light illuminating.
2. What are possible causes of the P2015 code in a Mercury?
- Potential causes include a faulty intake manifold runner position sensor/switch, damaged wiring or connectors, intake manifold runner control module issues, or a vacuum leak.
3. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit issue in my Mercury?
- Diagnosis involves using an OBDII scanner to retrieve the specific trouble code, visually inspecting the sensor and its wiring for any visible damage, and testing the sensor's resistance and voltage output.
4. Can I continue driving my Mercury with the P2015 code present?
- It is not recommended to drive your vehicle with the P2015 code active, as it can lead to further engine damage and performance issues. It is best to address the problem promptly.
5. What are the repair options for fixing the Intake Manifold Runner Position Sensor/Switch Circuit issue in a Mercury?
- Repair options may include replacing the faulty sensor, repairing damaged wiring or connectors, resetting the control module, or addressing any vacuum leaks in the intake system.
6. How much does it typically cost to repair the P2015 code in a Mercury?
- Repair costs can vary depending on the specific issue causing the code, but they may range from $200 to $500 for parts and labor.
7. Can I reset the P2015 code in my Mercury without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is not recommended to do so without addressing the root cause, as the problem is likely to reoccur.
8. Are there any preventive maintenance tips to avoid the P2015 code in my Mercury?
- Regularly inspecting and maintaining the intake manifold runner system, ensuring proper engine performance, and addressing any early signs of trouble can help prevent the occurrence of this code.
9. How long does it take to repair the Intake Manifold Runner Position Sensor/Switch Circuit issue in a Mercury?
- The repair time can vary depending on the specific cause of the problem, but it typically takes a few hours for a skilled mechanic to diagnose and fix the issue.
10. Will the P2015 code affect the overall performance of my Mercury?
- Yes, the P2015 code can significantly impact the performance of your vehicle, leading to issues such as reduced power, poor fuel efficiency, and potential engine misfires.
Discuss the causes and fixes for P2015 Mercury OBDII Code
Code P2015 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
