P2015 2008 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2015 2008 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2015 2008 Ford Fusion Description
What are the Possible Causes of the DTC P2015 2008 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2015 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2015 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2015 2008 Ford Fusion code?
Need more information on how to fix the P2015 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2015 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2015 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P2015 on a 2008 Ford Fusion?
The common symptoms of OBDII code P2015 on a 2008 Ford Fusion include rough idling, decreased engine performance, and the check engine light illuminating.
2. What does the OBDII code P2015 indicate in a 2008 Ford Fusion?
OBDII code P2015 in a 2008 Ford Fusion indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
3. What are the possible causes of OBDII code P2015 on a 2008 Ford Fusion?
Possible causes of OBDII code P2015 on a 2008 Ford Fusion include a faulty intake manifold runner position sensor/switch, damaged wiring or connectors, or a vacuum leak.
4. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit issue on a 2008 Ford Fusion?
Diagnosing the Intake Manifold Runner Position Sensor/Switch Circuit issue on a 2008 Ford Fusion involves checking the sensor's wiring and connectors for damage, testing the sensor's functionality, and inspecting for any vacuum leaks in the intake system.
5. Can OBDII code P2015 on a 2008 Ford Fusion be fixed without professional help?
In some cases, OBDII code P2015 on a 2008 Ford Fusion can be fixed without professional help by checking and repairing any damaged wiring or connectors related to the intake manifold runner position sensor/switch.
6. Is it safe to continue driving a 2008 Ford Fusion with OBDII code P2015?
It is not recommended to continue driving a 2008 Ford Fusion with OBDII code P2015 as it can lead to further engine damage and decreased performance.
7. How much does it typically cost to repair OBDII code P2015 on a 2008 Ford Fusion?
The cost to repair OBDII code P2015 on a 2008 Ford Fusion can vary depending on the exact cause of the issue, but it may range from $200 to $500 including parts and labor.
8. Can resetting the check engine light fix OBDII code P2015 on a 2008 Ford Fusion?
Resetting the check engine light may temporarily clear the code, but it will not fix the underlying issue causing OBDII code P2015 on a 2008 Ford Fusion.
9. How long does it usually take to repair OBDII code P2015 on a 2008 Ford Fusion?
The repair time for OBDII code P2015 on a 2008 Ford Fusion can range from 1 to 3 hours, depending on the complexity of the issue and the availability of parts.
10. What are some preventive maintenance tips to avoid OBDII code P2015 on a 2008 Ford Fusion?
To prevent OBDII code P2015 on a 2008 Ford Fusion, it's essential to perform regular engine inspections, keep up with scheduled maintenance, and address any minor issues promptly before they escalate.
Discuss the causes and fixes for P2015 2008 Ford Fusion OBDII Code
Code P2015 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
