P2015 2006 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2015 2006 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Position Sensor/Switch, Intake Manifold Runner Position Sensor/Switch harness is open or shorted, Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2015 2006 Ford Fusion Description
What are the Possible Causes of the DTC P2015 2006 Ford Fusion?
- Faulty Intake Manifold Runner Position Sensor/Switch
- Intake Manifold Runner Position Sensor/Switch harness is open or shorted
- Intake Manifold Runner Position Sensor/Switch circuit poor electrical connection
- Mechanical concern
- bind, seize, damage, or obstruction of IMRC hardware
How to Fix the DTC P2015 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2015 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2015 2006 Ford Fusion code?
Need more information on how to fix the P2015 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2015 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2015 2006 Ford Fusion Code
1. What does the OBDII code P2015 mean on a 2006 Ford Fusion?
P2015 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1, specifically a range or performance problem.
2. What are the common symptoms of code P2015 in a 2006 Ford Fusion?
Symptoms may include reduced engine performance, poor acceleration, rough idling, increased fuel consumption, and an illuminated Check Engine Light.
3. What causes the P2015 code to appear on a 2006 Ford Fusion?
Common causes include a faulty intake manifold runner control (IMRC) sensor, carbon buildup in the intake manifold, wiring issues, or a malfunctioning IMRC actuator.
4. Can I drive my 2006 Ford Fusion with the P2015 code?
Driving with code P2015 is possible but not recommended, as it can lead to reduced engine performance and potential long-term damage if unaddressed.
5. How do I diagnose the P2015 code on my 2006 Ford Fusion?
Diagnosis involves inspecting the IMRC sensor and actuator, checking for carbon buildup, testing the wiring harness for damage, and using a scan tool to monitor sensor readings.
6. How can I fix the P2015 code on a 2006 Ford Fusion?
Repairs may include cleaning carbon buildup in the intake manifold, replacing the IMRC sensor or actuator, repairing damaged wiring, or recalibrating the IMRC system.
7. How much does it cost to repair the P2015 code on a 2006 Ford Fusion?
Repair costs vary but can range from $100 to $600, depending on whether the IMRC sensor, actuator, or other components need replacement.
8. What tools are needed to fix the P2015 code on a 2006 Ford Fusion?
Useful tools include a diagnostic scan tool, multimeter, basic hand tools, and possibly cleaning supplies for carbon removal.
9. Can a dirty intake manifold cause the P2015 code on a 2006 Ford Fusion?
Yes, carbon buildup in the intake manifold can prevent proper IMRC operation, triggering the P2015 code.
10. Does the P2015 code affect emissions on a 2006 Ford Fusion?
Yes, a malfunctioning IMRC system can disrupt the air-fuel mixture, leading to higher emissions and potential failure of an emissions test.
Discuss the causes and fixes for P2015 2006 Ford Fusion OBDII Code
Code P2015 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
