AutoCodes
 
OBDII Code List
 
P2014 DODGE

P2014 DODGE - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Intake Manifold Runner Control (IMRC) monitor signal shorted to power
  • Faulty Intake Manifold Runner Control (IMRC) actuator
  • Faulty Intake Manifold Runner Control (IMRC) solenoid
  • Damage Powertrain Control Module (PCM)
  • Blocked vacuum hoses

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2014 Dodge Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open.
OBDII Code P2014 Dodge - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 - AutoCodes.com

Need more help?

Get the P2014 Dodge code diagnosed by a professional: Find a repair shop in your area

Related Information

P2014 DODGE Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2014 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧