AutoCodes – Toyota – P2014 2017 Toyota RAV4

P2014 2017 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1

Quick Answer

The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2014 2017 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Bank 1.
Common causes: Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 237

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2014 2017 Toyota RAV4 Description

The Tumble Control Valve (TCV) is built into the intake manifold. The Intake Air Control Valve Actuator (For Tumble Control Valve) is composed of a position sensor and a DC motor. The DC motor opens and closes the tumble control valve in response to signals from the Engine Control Module (ECM). The Tumble Control Valve Position Sensor is a non-contact type sensor. The position sensor measures the opening angle of the tumble control valve. The sensor is reliable and accurate, as it is electrically controlled by Hall-effect elements. The Diagnostic Trouble Code (DTC) will be set when the Tumble Control Valve Position Sensor output voltage flutters up and down beyond the normal operating range (less than 0.2 V, or higher than 4.8 V) for more than 0.5 seconds (open or short).

OBDII Code P2014 2017 Toyota RAV4 - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1 - AutoCodes.com — P2014 2017 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P2014 2017 Toyota RAV4?

Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
Tumble Control Valve Position Sensor harness is open or shorted
Tumble Control Valve Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2014 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2014 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2014 2017 Toyota RAV4 code?

Need more information on how to fix the P2014 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2014 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2014 2017 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2014 in a 2017 Toyota RAV4?

- Common symptoms include rough idling, loss of power, decreased fuel efficiency, and the Check Engine light being illuminated.

2. What does the OBDII code P2014 for a 2017 Toyota RAV4 indicate?

- The code P2014 refers to an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.

3. What are the potential causes of OBDII code P2014 in a 2017 Toyota RAV4?

- Possible causes include a faulty intake manifold runner position sensor/switch, damaged wiring or connectors, or a problem with the intake manifold itself.

4. How can I diagnose the OBDII code P2014 in my 2017 Toyota RAV4?

- Diagnosing the code may involve using an OBDII scanner to retrieve the error code, inspecting the intake manifold components, and checking the sensor wiring for any issues.

5. Can I continue driving my 2017 Toyota RAV4 with the OBDII code P2014?

- It is not recommended to drive the vehicle with this code as it can lead to further engine damage and decreased performance.

6. How can I repair OBDII code P2014 in my 2017 Toyota RAV4?

- Repair options may include replacing the intake manifold runner position sensor/switch, repairing damaged wiring or connectors, or cleaning the intake manifold.

7. Is it possible to reset the OBDII code P2014 in a 2017 Toyota RAV4 without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it will likely reappear if the root cause of the problem is not addressed.

8. Will OBDII code P2014 cause my 2017 Toyota RAV4 to fail an emissions test?

- Yes, the presence of this code may cause your vehicle to fail an emissions test due to the impact on engine performance and emissions control systems.

9. How much does it typically cost to repair OBDII code P2014 in a 2017 Toyota RAV4?

- The cost of repair can vary depending on the specific issue, but it may range from $200 to $500, including parts and labor.

10. Can a DIY enthusiast fix OBDII code P2014 in a 2017 Toyota RAV4?

- While some DIY enthusiasts may have the skills to address this issue, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the problem is resolved correctly.