P2014 2016 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2016 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Bank 1.
- Common causes
- Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC P2014 2016 Toyota RAV4?
- Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
- Tumble Control Valve Position Sensor harness is open or shorted
- Tumble Control Valve Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2014 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2016 Toyota RAV4 code?
Need more information on how to fix the P2014 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2016 Toyota RAV4 Code
What does OBDII code P2014 mean for a 2016 Toyota RAV4?
P2014 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1, meaning the sensor is not providing the expected signal to the engine control module (ECM).
What are the symptoms of code P2014 in a 2016 Toyota RAV4?
Common symptoms include reduced engine performance, poor fuel efficiency, rough idling, and an illuminated check engine light.
What causes the P2014 code to appear in a 2016 Toyota RAV4?
Possible causes include a faulty intake manifold runner position sensor, wiring or connector issues, carbon buildup in the intake manifold, or a malfunctioning intake manifold runner actuator.
How is the P2014 code diagnosed?
Technicians will use an OBDII scanner to confirm the code, inspect the intake manifold runner system components, check for wiring damage, and test the intake manifold runner position sensor.
Can I drive my 2016 Toyota RAV4 with the P2014 code?
Driving with this code may be possible, but it can lead to reduced performance and fuel efficiency. Prolonged driving without repair could cause further damage.
How do you fix the P2014 code in a 2016 Toyota RAV4?
Repairs may involve cleaning or replacing the intake manifold runner position sensor, repairing damaged wiring, cleaning carbon buildup, or replacing the intake manifold runner actuator.
What tools are needed to diagnose and repair the P2014 code?
Tools typically include an OBDII scanner, a multimeter for testing electrical connections, and basic mechanic tools. A borescope may help inspect carbon buildup.
What is the intake manifold runner system?
The intake manifold runner system optimizes airflow to the engine by adjusting the intake manifold’s path, improving performance and efficiency at different RPM ranges.
What is the cost to repair the P2014 code on a 2016 Toyota RAV4?
Costs vary depending on the exact issue. Sensor replacement may cost $150–$300, while actuator or wiring repairs could be higher. Labor costs depend on your location.
Can carbon buildup cause the P2014 code?
Yes, excessive carbon buildup in the intake manifold can restrict the movement of the intake manifold runner, triggering the P2014 code.
Discuss the causes and fixes for P2014 2016 Toyota RAV4 OBDII Code
Code P2014 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
