P2014 2015 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2015 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Bank 1.
- Common causes
- Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2015 Toyota RAV4 Description
What are the Possible Causes of the DTC P2014 2015 Toyota RAV4?
- Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
- Tumble Control Valve Position Sensor harness is open or shorted
- Tumble Control Valve Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2014 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2015 Toyota RAV4 code?
Need more information on how to fix the P2014 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2015 Toyota RAV4 Code
1. What does the OBDII code P2014 mean for a 2015 Toyota RAV4?
P2014 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1, which monitors the position of the intake manifold runner.
2. What are the common symptoms of code P2014 in a 2015 Toyota RAV4?
Symptoms may include reduced engine performance, poor fuel economy, a rough idle, and the Check Engine Light turning on.
3. What causes the P2014 code on a 2015 Toyota RAV4?
Common causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, or carbon buildup in the intake manifold.
4. Can I drive my 2015 Toyota RAV4 with the P2014 code?
While the vehicle may still be drivable, it is not recommended to ignore the issue, as it can lead to reduced performance and long-term engine damage.
5. How is the P2014 code diagnosed on a 2015 Toyota RAV4?
A mechanic will perform a visual inspection of the wiring and connectors, use a scan tool to verify the code, and test the intake manifold runner position sensor for proper operation.
6. How do I fix the P2014 code on a 2015 Toyota RAV4?
Repairs may involve cleaning or replacing the intake manifold runner position sensor, repairing damaged wiring, or cleaning carbon buildup in the intake manifold.
7. How much does it cost to fix the P2014 code on a 2015 Toyota RAV4?
The repair cost can vary, but replacing the intake manifold runner position sensor typically ranges from $100 to $300, including parts and labor.
8. What tools are needed to repair the P2014 code on a 2015 Toyota RAV4?
Basic tools include a diagnostic scan tool, multimeter, and possibly a socket set and cleaning supplies for carbon removal.
9. Can a dirty intake manifold cause the P2014 code on a 2015 Toyota RAV4?
Yes, excessive carbon buildup in the intake manifold can restrict the movement of the intake manifold runner, triggering the code.
10. Will clearing the P2014 code with a scan tool fix the problem on my 2015 Toyota RAV4?
Clearing the code will turn off the Check Engine Light temporarily, but the issue causing the code must be addressed to prevent it from returning.
Discuss the causes and fixes for P2014 2015 Toyota RAV4 OBDII Code
Code P2014 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
