AutoCodes – Toyota – P2014 2014 Toyota RAV4

P2014 2014 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1

Quick Answer

The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2014 2014 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Bank 1.
Common causes: Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,392

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2014 2014 Toyota RAV4 Description

The Tumble Control Valve (TCV) is built into the intake manifold. The Intake Air Control Valve Actuator (For Tumble Control Valve) is composed of a position sensor and a DC motor. The DC motor opens and closes the tumble control valve in response to signals from the Engine Control Module (ECM). The Tumble Control Valve Position Sensor is a non-contact type sensor. The position sensor measures the opening angle of the tumble control valve. The sensor is reliable and accurate, as it is electrically controlled by Hall-effect elements. The Diagnostic Trouble Code (DTC) will be set when the Tumble Control Valve Position Sensor output voltage flutters up and down beyond the normal operating range (less than 0.2 V, or higher than 4.8 V) for more than 0.5 seconds (open or short).

OBDII Code P2014 2014 Toyota RAV4 - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1 - AutoCodes.com — P2014 2014 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P2014 2014 Toyota RAV4?

Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
Tumble Control Valve Position Sensor harness is open or shorted
Tumble Control Valve Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2014 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2014 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2014 2014 Toyota RAV4 code?

Need more information on how to fix the P2014 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2014 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2014 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2014 in a 2014 Toyota RAV4?

The common symptoms of OBDII code P2014 in a 2014 Toyota RAV4 include rough idling, decreased engine performance, and the illumination of the Check Engine Light.

2. What does the OBDII code P2014 for a 2014 Toyota RAV4 indicate?

OBDII code P2014 for a 2014 Toyota RAV4 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.

3. What are the possible causes of OBDII code P2014 in a 2014 Toyota RAV4?

Possible causes of OBDII code P2014 in a 2014 Toyota RAV4 include a faulty intake manifold runner position sensor/switch, wiring issues, or a malfunctioning engine control module.

4. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 issue causing OBDII code P2014 in my 2014 Toyota RAV4?

Diagnosing the issue involves checking the wiring connections, testing the sensor's resistance, and inspecting for any physical damage or corrosion that may be affecting the sensor's performance.

5. Can I continue driving my 2014 Toyota RAV4 with OBDII code P2014?

It is not recommended to continue driving your 2014 Toyota RAV4 with OBDII code P2014 as it can lead to further engine damage and reduced fuel efficiency. It is best to address the issue promptly.

6. How can I repair the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 problem triggering OBDII code P2014 in my 2014 Toyota RAV4?

Repairing the issue may involve replacing the faulty sensor or switch, repairing any damaged wiring, or reprogramming the engine control module to address the problem.

7. Can a DIY enthusiast fix OBDII code P2014 in a 2014 Toyota RAV4?

While some basic troubleshooting steps can be performed by a DIY enthusiast, diagnosing and repairing the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 issue may require specialized tools and expertise, so professional assistance is recommended.

8. How much does it cost to fix OBDII code P2014 in a 2014 Toyota RAV4?

The cost of fixing OBDII code P2014 in a 2014 Toyota RAV4 can vary depending on the root cause of the issue, the required parts, and labor costs. It is advisable to obtain quotes from reputable mechanics or service centers.

9. Is OBDII code P2014 a common issue in 2014 Toyota RAV4 vehicles?

While OBDII code P2014 related to the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 is not extremely common in 2014 Toyota RAV4 vehicles, it can still occur due to sensor failures or wiring issues.

10. How often should I have the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 inspected in my 2014 Toyota RAV4 to prevent OBDII code P2014?

Regular maintenance checks as part of your vehicle's service schedule can help identify any potential issues with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 early on, helping to prevent triggering OBDII code P2014.