P2014 2013 Toyota RAV4 Code - Intake Manifold Runner Position Sensor / Switch Circuit Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2013 Toyota RAV4 indicates Intake Manifold Runner Position Sensor / Switch Circuit Bank 1.
- Common causes
- Common causes include Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator), Tumble Control Valve Position Sensor harness is open or shorted, Tumble Control Valve Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC P2014 2013 Toyota RAV4?
- Faulty Tumble Control Valve Position Sensor (Built into Intake Air Control Valve Actuator)
- Tumble Control Valve Position Sensor harness is open or shorted
- Tumble Control Valve Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2014 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2013 Toyota RAV4 code?
Need more information on how to fix the P2014 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2013 Toyota RAV4 Code
What does OBDII code P2014 mean for a 2013 Toyota RAV4?
Code P2014 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit for Bank 1, which monitors the position of the intake manifold runner.
What are common symptoms of code P2014 in a 2013 Toyota RAV4?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, and the Check Engine Light being illuminated.
What causes code P2014 in a 2013 Toyota RAV4?
Common causes include a malfunctioning intake manifold runner position sensor, wiring issues, or carbon buildup restricting the intake manifold runner's movement.
How can I diagnose code P2014 in a 2013 Toyota RAV4?
Start by inspecting the intake manifold runner position sensor and wiring for damage, then use a scan tool to monitor sensor readings and check for abnormal values.
Can a dirty intake manifold cause code P2014?
Yes, excessive carbon buildup in the intake manifold can obstruct runner movement and trigger this code.
Is it safe to drive a 2013 Toyota RAV4 with code P2014?
While it may be safe to drive short distances, driving with this code can lead to reduced engine efficiency and potential damage over time.
How do I fix code P2014 on a 2013 Toyota RAV4?
Repairs may include cleaning the intake manifold, replacing the intake manifold runner position sensor, or repairing damaged wiring.
What tools are needed to resolve code P2014?
You may need an OBDII scan tool, multimeter, and basic automotive tools to inspect, diagnose, and repair issues related to this code.
Can a faulty intake manifold runner cause engine misfires?
Yes, if the intake manifold runner is stuck or malfunctioning, it can disrupt air-fuel mixture and cause misfires.
How much does it cost to repair code P2014 on a 2013 Toyota RAV4?
Repair costs depend on the root cause but typically range from $150 to $500, including parts and labor.
Discuss the causes and fixes for P2014 2013 Toyota RAV4 OBDII Code
Code P2014 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
