P2014 2012 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2012 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
- Common causes
- Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2012 Ford Fusion Description
What are the Possible Causes of the DTC P2014 2012 Ford Fusion?
- Intake manifold runner control monitor circuit open
- Mechanical concern
- bind, seize, damage or obstruction of IMRC hardware
How to Fix the DTC P2014 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2012 Ford Fusion code?
Need more information on how to fix the P2014 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P2014 in a 2012 Ford Fusion?
- Common symptoms include rough idle, engine hesitation, reduced power, and the Check Engine light illuminating.
2. What does the OBDII code P2014 on a 2012 Ford Fusion indicate?
- The code P2014 indicates an issue with the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
3. What are some possible causes of OBDII code P2014 in a 2012 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor/switch, wiring issues, or a defective intake manifold.
4. How can I diagnose the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 issue in my 2012 Ford Fusion?
- A diagnostic scan tool can help pinpoint the specific problem by reading the fault codes and analyzing live sensor data.
5. Can I continue driving my 2012 Ford Fusion with OBDII code P2014?
- It is not recommended to drive with this code present, as it can lead to poor engine performance and potential damage if left unresolved.
6. Is it possible to repair the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 issue in my 2012 Ford Fusion myself?
- While some basic troubleshooting like checking connections and wiring can be done, diagnosing and repairing the root cause may require professional assistance.
7. How much does it typically cost to fix OBDII code P2014 in a 2012 Ford Fusion?
- The cost of repairs can vary depending on the exact cause of the issue, but it is advisable to budget for sensor replacement or potential intake manifold repairs.
8. Will resetting the Check Engine light resolve OBDII code P2014 in my 2012 Ford Fusion?
- Resetting the light may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear.
9. Can a dirty or clogged intake manifold cause OBDII code P2014 in a 2012 Ford Fusion?
- Yes, a dirty or clogged intake manifold can disrupt the proper operation of the intake manifold runner position sensor/switch and trigger code P2014.
10. How important is it to address OBDII code P2014 promptly in a 2012 Ford Fusion?
- It is essential to address the code promptly to prevent further engine damage, ensure optimal performance, and maintain fuel efficiency.
Discuss the causes and fixes for P2014 2012 Ford Fusion OBDII Code
Code P2014 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
