AutoCodes – Toyota – P2014 2007 Toyota Camry

P2014 2007 Toyota Camry Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Quick Answer

The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2014 2007 Toyota Camry indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
Common causes: Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,849

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2014 2007 Toyota Camry Description

The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. The IMRV motor opens and closes the IMRV using multiple gears. The valve position sensor detects the opening angle of the IMRV.
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.

OBDII Code P2014 2007 Toyota Camry - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1 - AutoCodes.com — P2014 2007 Toyota Camry Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

What does this mean?

What are the Possible Causes of the DTC P2014 2007 Toyota Camry?

Intake Manifold Runner Valve Binding Or Sticking
Intake Manifold Runner Valve
Vacuum Line Cracked or Broken (Vacuum Leak)
Intake Manifold Runner Position Sensor 1 or Wiring
Faulty Engine Control Module (ECM)

How to Fix the DTC P2014 2007 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2014 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2014 2007 Toyota Camry code?

Need more information on how to fix the P2014 2007 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2014 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2014 2007 Toyota Camry Code

What does the OBDII code P2014 mean for a 2007 Toyota Camry?

The P2014 code indicates that there is a problem with the intake manifold runner position sensor or switch circuit for bank 1, which can affect engine performance.

What are the common symptoms of the P2014 code?

Common symptoms include a check engine light, a rough idle, reduced engine power, and poor fuel economy.

What could cause the P2014 code to trigger in my 2007 Toyota Camry?

Possible causes include a faulty intake manifold runner position sensor, a wiring issue, a malfunctioning intake manifold, or a vacuum leak.

How can I diagnose the P2014 code?

Start by using an OBDII scanner to confirm the code. Check the wiring and connectors for damage, test the intake manifold runner position sensor for proper operation, and inspect the intake manifold for any mechanical issues.

What are some common repairs for the P2014 code?

Repairs may include replacing a faulty intake manifold runner position sensor, repairing damaged wiring or connectors, or replacing the entire intake manifold if necessary.

Can I drive my 2007 Toyota Camry with the P2014 code?

While it may be drivable, it's not recommended as it can lead to decreased engine performance and fuel efficiency, and may cause further damage if not addressed.

Is it safe to reset the check engine light after fixing the P2014 code?

Yes, after addressing the underlying issue, you can reset the check engine light using an OBDII scanner. However, ensure the problem is truly resolved to avoid re-triggering the code.

How much does it typically cost to repair the P2014 code?

Repair costs can vary widely, but expect to spend anywhere from $100 to $500 depending on whether it's a simple sensor replacement or a more complex intake manifold issue.

Will clearing the P2014 code fix my car's performance issues?

Clearing the code will turn off the check engine light, but it won't fix any underlying issues. Proper diagnosis and repair of the root cause are necessary for restoring performance.