P2014 2006 Toyota Camry Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2006 Toyota Camry indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2006 Toyota Camry Description
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.
What are the Possible Causes of the DTC P2014 2006 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2014 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2006 Toyota Camry code?
Need more information on how to fix the P2014 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2006 Toyota Camry Code
1. What does the OBDII code P2014 mean on a 2006 Toyota Camry?
P2014 indicates a problem with the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1, which monitors the position of the intake manifold runner.
2. What are the common symptoms of P2014 in a 2006 Toyota Camry?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, hesitation during acceleration, and an illuminated check engine light.
3. What causes the P2014 code to appear in a Toyota Camry?
Common causes include a faulty intake manifold runner position sensor, damaged wiring or connectors, a stuck intake manifold runner, or carbon buildup impeding movement.
4. Can I drive my 2006 Toyota Camry with a P2014 code?
While the car may still run, driving with this code can lead to reduced performance and potential long-term engine damage. It’s best to diagnose and repair the issue promptly.
5. How do I diagnose the P2014 code on my Toyota Camry?
Start by inspecting the intake manifold runner sensor and associated wiring for damage. Then, use a scan tool to monitor sensor data and verify its functionality.
6. How is the P2014 code fixed on a 2006 Toyota Camry?
Repairs may include cleaning or replacing the intake manifold runner sensor, repairing damaged wiring or connectors, or cleaning carbon buildup inside the intake manifold.
7. How much does it cost to fix the P2014 code on a Toyota Camry?
The repair cost varies, but replacing the intake manifold runner sensor typically ranges from $150 to $400, depending on labor rates and part prices.
8. Can a dirty intake manifold cause the P2014 code?
Yes, carbon buildup in the intake manifold can cause the runner to stick, leading to sensor circuit issues and triggering the code.
9. Is resetting the check engine light enough to fix the P2014 code?
No, resetting the light without fixing the root cause will only mask the issue temporarily, and the code is likely to return.
10. Is the P2014 code specific to Bank 1 on a 2006 Toyota Camry?
Yes, P2014 refers specifically to the Intake Manifold Runner Position Sensor/Switch Circuit on Bank 1, which is the side of the engine containing cylinder 1.
Discuss the causes and fixes for P2014 2006 Toyota Camry OBDII Code
Code P2014 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
