P2014 2006 Ford Fusion Code - Intake Manifold Runner Position Sensor/Switch Circuit Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) system is monitored for failure during continuous or Key On Engine Off (KOEO) self-test. Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2014 2006 Ford Fusion indicates Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
- Common causes
- Common causes include Intake manifold runner control monitor circuit open, Mechanical concern, bind, seize, damage or obstruction of IMRC hardware.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2014 2006 Ford Fusion Description
What are the Possible Causes of the DTC P2014 2006 Ford Fusion?
- Intake manifold runner control monitor circuit open
- Mechanical concern
- bind, seize, damage or obstruction of IMRC hardware
How to Fix the DTC P2014 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2014 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2014 2006 Ford Fusion code?
Need more information on how to fix the P2014 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2014 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2014 2006 Ford Fusion Code
1. What are the common symptoms of OBDII code P2014 on a 2006 Ford Fusion?
- Common symptoms include rough idling, reduced engine performance, stalling, and the illumination of the check engine light.
2. What does the OBDII code P2014 for a 2006 Ford Fusion indicate?
- The code P2014 indicates a malfunction in the Intake Manifold Runner Position Sensor/Switch Circuit Bank 1.
3. What are the possible causes of OBDII code P2014 on a 2006 Ford Fusion?
- Possible causes include a faulty intake manifold runner position sensor/switch, wiring issues, vacuum leaks, or a problem with the intake manifold itself.
4. How can I diagnose the source of OBDII code P2014 on my 2006 Ford Fusion?
- Diagnosing the issue involves checking the intake manifold runner position sensor/switch, inspecting the wiring for damage, and performing a vacuum leak test.
5. Can I still drive my 2006 Ford Fusion with OBDII code P2014?
- It is not recommended to drive the vehicle with code P2014 as it can lead to further damage and potential safety issues.
6. How can I repair OBDII code P2014 on a 2006 Ford Fusion?
- Repair options include replacing the faulty intake manifold runner position sensor/switch, repairing damaged wiring, fixing vacuum leaks, or replacing the intake manifold.
7. Is it possible to reset OBDII code P2014 on a 2006 Ford Fusion without making repairs?
- Resetting the code without addressing the underlying issue will only temporarily clear the check engine light, but the problem will likely reappear.
8. Will OBDII code P2014 on a 2006 Ford Fusion affect fuel efficiency?
- Yes, code P2014 can affect fuel efficiency due to improper air-fuel mixture, leading to decreased performance and potentially higher fuel consumption.
9. How much does it cost to repair OBDII code P2014 on a 2006 Ford Fusion?
- The cost of repairs for code P2014 can vary depending on the exact cause, but it typically ranges from $200 to $500 including parts and labor.
10. Can I prevent OBDII code P2014 from occurring on my 2006 Ford Fusion?
- Regular maintenance, including checking and replacing the intake manifold runner position sensor/switch as needed, can help prevent code P2014 from occurring.
Discuss the causes and fixes for P2014 2006 Ford Fusion OBDII Code
Code P2014 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
