P2008 Lexus Code - Intake Manifold Runner Control Circuit/Open Bank 1
Quick Answer
The swirl control valve is mounted on the intake manifold. Common causes include Faulty VSV for swirl control valve, VSV for swirl control valve harness is open or shorted, VSV for swirl control valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2008 Lexus indicates Intake Manifold Runner Control Circuit/Open Bank 1.
- Common causes
- Common causes include Faulty VSV for swirl control valve, VSV for swirl control valve harness is open or shorted, VSV for swirl control valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2008 Lexus Description
The Engine Control Module (ECM) determines the opening angle of the swirl control valve, and uses the VSV for swirl control valve to change the vacuum applied to the actuator’s diaphragm to open and close the swirl control valve.
What are the Possible Causes of the DTC P2008 Lexus?
- Faulty VSV for swirl control valve
- VSV for swirl control valve harness is open or shorted
- VSV for swirl control valve circuit poor electrical connection
- Faulty Intake manifold (swirl control valve)
- Faulty EGR valve assy
- Faulty MAF meter
- Faulty Engine Control Module (ECM) WIRI
How to Fix the DTC P2008 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2008 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2008 Lexus code?
Need more information on how to fix the P2008 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2008 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2008 Lexus Code
1. What does the OBDII code P2008 mean on a Lexus?
The P2008 code indicates a problem with the Intake Manifold Runner Control (IMRC) Circuit on Bank 1, typically due to an electrical fault or a mechanical issue in the IMRC system.
2. What are the common symptoms of P2008 on a Lexus?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, a lack of power at certain RPM ranges, and the Check Engine Light turning on.
3. What causes the P2008 code to appear on a Lexus?
Common causes include a faulty intake manifold runner control solenoid, damaged wiring or connectors in the IMRC circuit, a stuck intake manifold runner, or a failed engine control module (ECM).
4. Can I drive my Lexus with the P2008 code active?
While the car may still be drivable, it can experience reduced performance and efficiency. Prolonged driving with this issue may lead to further engine damage.
5. How is the P2008 code diagnosed on a Lexus?
A mechanic will typically use a scan tool to verify the code, inspect the IMRC solenoid and wiring for damage, test the solenoid's resistance, and ensure the intake manifold runner moves freely.
6. How do I fix the P2008 code on my Lexus?
Repairs may involve replacing the IMRC solenoid, repairing or replacing damaged wiring, cleaning or repairing the intake manifold runner, or reprogramming/updating the ECM if required.
7. How much does it cost to repair the P2008 code on a Lexus?
Repair costs vary depending on the issue but generally range from $150 to $600, with labor and parts included.
8. Can a dirty intake manifold cause the P2008 code on a Lexus?
Yes, carbon buildup in the intake manifold can cause the intake manifold runner to stick, triggering the P2008 code.
9. Is the P2008 code specific to Lexus vehicles?
No, the P2008 code is a generic OBDII code that can appear on any vehicle, but its specific symptoms and repair procedures can vary by make and model.
10. Will clearing the P2008 code fix the issue on my Lexus?
Clearing the code may temporarily turn off the Check Engine Light, but the underlying problem must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2008 Lexus OBDII Code
Code P2008 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
