P2008 Dodge Code - Intake Manifold Runner Control Circuit/Open Bank 1
Quick Answer
The engine is equipped with an intake manifold flow control valve to promote maximum air/fuel atomization. Common causes include Intake Manifold Runner Binding Or Sticking, Faulty Manifold flow valve, Manifold flow valve harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2008 Dodge indicates Intake Manifold Runner Control Circuit/Open Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Binding Or Sticking, Faulty Manifold flow valve, Manifold flow valve harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2008 Dodge Description
What are the Possible Causes of the DTC P2008 Dodge?
- Intake Manifold Runner Binding Or Sticking
- Faulty Manifold flow valve
- Manifold flow valve harness is open or shorted
- Manifold flow valve circuit poor electrical connection
How to Fix the DTC P2008 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2008 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2008 Dodge code?
Need more information on how to fix the P2008 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2008 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2008 Dodge Code
What does the OBDII code P2008 mean on a Dodge vehicle?
Code P2008 indicates an issue with the intake manifold runner control circuit for Bank 1, typically due to a malfunction or electrical fault in the system.
What are the common symptoms of code P2008 in a Dodge vehicle?
Symptoms may include reduced engine performance, rough idling, poor fuel economy, hesitation during acceleration, and an illuminated Check Engine Light.
What causes the P2008 code on a Dodge?
Common causes include a faulty intake manifold runner control solenoid, damaged wiring or connectors in the circuit, vacuum leaks, or a malfunctioning intake manifold runner actuator.
Can I still drive my Dodge with a P2008 code?
While the vehicle may still be drivable, performance issues like hesitation and reduced efficiency could worsen over time. Prompt diagnosis and repair are recommended to avoid further damage.
How do I diagnose the P2008 code on a Dodge?
Diagnosing involves inspecting the intake manifold runner control solenoid, checking the wiring and connectors for damage, and testing the actuator and vacuum supply for proper operation.
What repairs are typically needed for a P2008 code?
Repairs may include replacing the intake manifold runner control solenoid, repairing or replacing damaged wiring, fixing vacuum leaks, or replacing the intake manifold runner actuator if necessary.
How much does it cost to fix code P2008 on a Dodge?
The repair cost varies depending on the issue but typically ranges from $100 to $500, including parts and labor, with actuator replacement being on the higher end.
Can a dirty intake manifold cause the P2008 code?
Yes, excessive carbon buildup in the intake manifold can cause the runner control system to stick or fail, triggering the P2008 code. Cleaning may resolve the issue.
Will clearing the code fix the problem?
Clearing the code may temporarily turn off the Check Engine Light, but it won't address the underlying issue causing the code to appear. Proper diagnosis and repair are necessary.
Is the P2008 code specific to Dodge vehicles?
No, code P2008 is a standard OBDII code that can appear in various makes and models, but the troubleshooting steps and affected components may vary slightly by vehicle.
Discuss the causes and fixes for P2008 Dodge OBDII Code
-
I have a 2012 Ram 1500 Outdoorsman with the 5.7 Hemi. On a trip back from hunting the engine decided to eat the intake lobe on Cyl #3.. Long story shortened---rebuilt engine from Powertrain . good people.. anyway installed and popped right off. But P2008 and P2017 came on and can'i clear DTC. Checked relay, Fuse, and wiring to SRV Control p/n 53022137AH . checked okay. ordered replacement they have changed unit now 53022137AJ. Still have same problem cannot clear P2008 or P2017. Any further thoughts?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
