AutoCodes – Ford – P2008 2010 Ford Fusion

P2008 2010 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

Quick Answer

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2008 2010 Ford Fusion indicates Intake Manifold Runner Control Circuit/Open Bank 1.
Common causes: Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,649

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2008 2010 Ford Fusion Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open, and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm, the vacuum solenoid will be energized. This will allow the manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm, the vacuum solenoid will be de-energized. This will allow a vacuum to vent from the actuator and the butterfly valve plates to open. The Diagnostic Trouble Code (DTC) indicates a failure in the IMRC primary control circuit.

OBDII Code P2008 2010 Ford Fusion - Intake Manifold Runner Control Circuit/Open Bank 1 - AutoCodes.com — P2008 2010 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P2008 2010 Ford Fusion?

Faulty Intake Manifold Runner Control (IMRC) actuator
Intake Manifold Runner Control actuator harness is open or shorted
Intake Manifold Runner Control actuator circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2008 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2008 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2008 2010 Ford Fusion code?

Need more information on how to fix the P2008 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2008 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2008 2010 Ford Fusion Code

1. What does OBDII code P2008 mean for a 2010 Ford Fusion?

The code P2008 on a 2010 Ford Fusion indicates an issue with the Intake Manifold Runner Control Circuit/Open Bank 1.

2. What are the common symptoms of OBDII code P2008 in a 2010 Ford Fusion?

Common symptoms of code P2008 in a 2010 Ford Fusion may include poor engine performance, reduced fuel efficiency, and the illumination of the check engine light.

3. What are the possible causes of OBDII code P2008 in a 2010 Ford Fusion?

Potential causes of code P2008 in a 2010 Ford Fusion include a faulty intake manifold runner control solenoid, damaged wiring or connectors, or a malfunctioning intake manifold.

4. How can I diagnose the Intake Manifold Runner Control Circuit/Open Bank 1 issue in my 2010 Ford Fusion?

To diagnose the P2008 code in a 2010 Ford Fusion, you can perform a visual inspection of the intake manifold components, check the wiring and connectors for any damage, and use an OBDII scanner to retrieve specific diagnostic trouble codes.

5. Can I drive my 2010 Ford Fusion with OBDII code P2008?

It is not recommended to continue driving your 2010 Ford Fusion with code P2008, as it can cause further damage to the engine and emissions system. It is best to address the issue promptly.

6. How can I repair OBDII code P2008 on my 2010 Ford Fusion?

Repairing code P2008 on a 2010 Ford Fusion may involve replacing the intake manifold runner control solenoid, repairing or replacing damaged wiring or connectors, or cleaning/replacing the intake manifold.

7. Is it possible to clear OBDII code P2008 on a 2010 Ford Fusion without fixing the issue?

While you can clear the code temporarily with an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as it may lead to recurring issues and potential engine damage.

8. How much does it cost to fix OBDII code P2008 on a 2010 Ford Fusion?

The cost to fix code P2008 on a 2010 Ford Fusion can vary depending on the specific cause of the issue, parts needed for repair, and labor costs. It is advisable to consult a mechanic for an accurate estimate.

9. Can a DIY enthusiast repair OBDII code P2008 on a 2010 Ford Fusion?

While some DIY enthusiasts may be able to address code P2008 on a 2010 Ford Fusion themselves, it is recommended to have a good understanding of automotive systems and access to proper tools to ensure a successful repair.

10. How long does it take to fix OBDII code P2008 on a 2010 Ford Fusion?

The time required to fix code P2008 on a 2010 Ford Fusion can vary based on the specific issue and repair process. It may take a few hours to a full day, depending on the complexity of the repair.