AutoCodes – Ford – P2008 2006 Ford Fusion

P2008 2006 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

Quick Answer

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2008 2006 Ford Fusion indicates Intake Manifold Runner Control Circuit/Open Bank 1.
Common causes: Common causes include Faulty Intake Manifold Runner Control (IMRC) actuator, Intake Manifold Runner Control actuator harness is open or shorted, Intake Manifold Runner Control actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,064

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2008 2006 Ford Fusion Description

The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open, and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm, the vacuum solenoid will be energized. This will allow the manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm, the vacuum solenoid will be de-energized. This will allow a vacuum to vent from the actuator and the butterfly valve plates to open. The Diagnostic Trouble Code (DTC) indicates a failure in the IMRC primary control circuit.

OBDII Code P2008 2006 Ford Fusion - Intake Manifold Runner Control Circuit/Open Bank 1 - AutoCodes.com — P2008 2006 Ford Fusion Code - Intake Manifold Runner Control Circuit/Open Bank 1

What does this mean?

What are the Possible Causes of the DTC P2008 2006 Ford Fusion?

Faulty Intake Manifold Runner Control (IMRC) actuator
Intake Manifold Runner Control actuator harness is open or shorted
Intake Manifold Runner Control actuator circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2008 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2008 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2008 2006 Ford Fusion code?

Need more information on how to fix the P2008 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2008 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2008 2006 Ford Fusion Code

1. What are the common symptoms of OBDII code P2008 on a 2006 Ford Fusion?

The common symptoms of code P2008 include rough idling, decreased engine performance, and the illumination of the check engine light.

2. What does the OBDII code P2008 indicate on a 2006 Ford Fusion?

Code P2008 signifies an issue with the Intake Manifold Runner Control (IMRC) circuit on Bank 1 of the engine.

3. What are the possible causes of OBDII code P2008 on a 2006 Ford Fusion?

Possible causes of code P2008 can include a faulty Intake Manifold Runner Control (IMRC) actuator, damaged wiring or connectors in the IMRC circuit, or a vacuum leak in the intake system.

4. How can I diagnose the Intake Manifold Runner Control circuit issue causing OBDII code P2008 on my 2006 Ford Fusion?

Diagnosing the IMRC circuit issue involves checking the IMRC actuator for proper operation, inspecting the wiring and connectors for any damage, and testing for vacuum leaks in the intake system using a smoke machine or a vacuum gauge.

5. Can I drive my 2006 Ford Fusion with OBDII code P2008?

It is not recommended to drive your vehicle with code P2008, as it can lead to decreased engine performance and potential further damage to the intake system components.

6. How can I repair OBDII code P2008 on my 2006 Ford Fusion?

Repairing code P2008 typically involves replacing the faulty Intake Manifold Runner Control (IMRC) actuator, repairing any damaged wiring or connectors, and addressing any vacuum leaks in the intake system.

7. Will resetting the check engine light resolve OBDII code P2008 on a 2006 Ford Fusion?

Simply resetting the check engine light will not fix the underlying issue causing code P2008. It is essential to diagnose and repair the problem to prevent the code from reoccurring.

8. Are there any common tricks or DIY solutions to fix OBDII code P2008 on a 2006 Ford Fusion?

While there are no common DIY solutions for code P2008, ensuring proper maintenance of the intake system and addressing any vacuum leaks promptly can help prevent this issue.

9. How much does it typically cost to repair OBDII code P2008 on a 2006 Ford Fusion?

The cost of repairing code P2008 can vary depending on the specific cause of the issue, but it may range from $200 to $500, including parts and labor.

10. Can a mechanic easily fix OBDII code P2008 on a 2006 Ford Fusion, or should I take it to a dealership?

An experienced mechanic should be able to diagnose and repair code P2008 on a 2006 Ford Fusion. However, if the issue is covered under warranty or requires specialized equipment, taking it to a dealership may be beneficial.