P2007 2006 FORD FUSION - Intake Manifold Runner Control Stuck Closed Bank 2
When is the code detected?The P2007 is set when the Intake Manifold Runner Control (IMRC) is commanded open by the Powertrain Control Module (PCM), but the IMRC indicates closed.
P2007 2006 Ford Fusion DescriptionThe Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. The linkage attaches to the housing butterfly plate levers. Each IMRC housing is an aluminum casting with two intake air passages for each cylinder. One passage is always open and the other is opened and closed with a butterfly valve plate. The housing uses a return spring to hold the plates closed. The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM), indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed. Above approximately 3000 rpm , the vacuum solenoid will be de-energized. This will allow vacuum to vent from the actuator and the butterfly valve plates to open.
Need more help?Do you need more help with the P2007 2006 Ford Fusion code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
P2007 2006 FORD FUSION CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2007 2006 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks