P2006 2016 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2016 Toyota RAV4 indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2016 Toyota RAV4 Description
When the tumble control valve is closed, the intake air tumble flow intensifies, and negative pressure is generated between the tumble control valve and intake valve which atomizes the fuel. Combustion is enhanced and exhaust gas emissions are reduced at low temperatures.
When the ECM has requested a tumble control valve open operation but the actual tumble control valve opening angle is less than 35 deg. for 10 seconds, DTC P2006 is stored.
What are the Possible Causes of the DTC P2006 2016 Toyota RAV4?
- Faulty Intake Air Control Valve Actuator (For Tumble Control Valve)
- Intake Air Control Valve Actuator harness is open or shorted
- Intake Air Control Valve Actuator circuit poor electrical connection
- Faulty Intake manifold
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2016 Toyota RAV4 code?
Need more information on how to fix the P2006 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2016 Toyota RAV4 Code
1. What does the OBDII code P2006 in a 2016 Toyota RAV4 mean?
The code P2006 indicates an issue with the Intake Manifold Runner Control (IMRC) system being stuck closed in Bank 1 of the engine.
2. What are the common symptoms of a P2006 code in a Toyota RAV4?
Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and the check engine light being illuminated on the dashboard.
3. What are the possible causes of the Intake Manifold Runner Control being stuck closed in a Toyota RAV4?
Potential causes include a faulty IMRC actuator, a stuck intake manifold runner valve, wiring issues, or a problem with the IMRC solenoid.
4. How can I diagnose the cause of a P2006 code in my 2016 Toyota RAV4?
A thorough diagnostic procedure involves inspecting the IMRC components, checking for wiring issues, testing the actuator, and using a scan tool to monitor IMRC operation.
5. Can I continue driving my Toyota RAV4 with a P2006 code?
It is not recommended to drive your vehicle for an extended period with a P2006 code, as it can lead to further engine damage and decreased performance.
6. How can I repair the Intake Manifold Runner Control Stuck Closed Bank 1 issue in my Toyota RAV4?
Repair options may include replacing the IMRC actuator, cleaning or replacing the intake manifold runner valve, repairing wiring issues, or addressing any faults with the IMRC solenoid.
7. Is it possible to reset the P2006 code in a Toyota RAV4 without fixing the underlying issue?
Resetting the code without addressing the root cause will only temporarily clear the check engine light, and the problem is likely to reoccur.
8. Are there any preventative maintenance tips to avoid the P2006 code in a Toyota RAV4?
Regularly servicing the intake system, using high-quality fuel, and addressing any engine performance issues promptly can help prevent the occurrence of the P2006 code.
9. Can a DIY enthusiast fix the Intake Manifold Runner Control issue in a Toyota RAV4?
Depending on your mechanical skills and access to tools, some DIY enthusiasts may be able to address simpler causes of the P2006 code, such as cleaning the intake manifold runner valve.
10. How long does it typically take to repair a P2006 code in a Toyota RAV4?
The repair time can vary depending on the exact cause of the issue, but it may take a few hours to a full day to diagnose, obtain parts, and fix the Intake Manifold Runner Control Stuck Closed Bank 1 problem in a Toyota RAV4.
Discuss the causes and fixes for P2006 2016 Toyota RAV4 OBDII Code
Code P2006 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
