AutoCodes – Toyota – P2006 2013 Toyota RAV4

P2006 2013 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Closed Bank 1

Quick Answer

The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2006 2013 Toyota RAV4 indicates Intake Manifold Runner Control Stuck Closed Bank 1.
Common causes: Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 289

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 15, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2006 2013 Toyota RAV4 Description

The Tumble Control Valve (TCV) is built into the intake manifold. The Intake Air Control Valve Actuator (For Tumble Control Valve) is composed of a position sensor and a DC motor. The DC motor opens and closes the tumble control valve in response to signals from the Engine Control Module (ECM). The position sensor detects the opening angle of the tumble control valve.
When the tumble control valve is closed, the intake air tumble flow intensifies, and negative pressure is generated between the tumble control valve and intake valve which atomizes the fuel. Combustion is enhanced and exhaust gas emissions are reduced at low temperatures.
When the ECM has requested a tumble control valve open operation but the actual tumble control valve opening angle is less than 35 deg. for 10 seconds, DTC P2006 is stored.

OBDII Code P2006 2013 Toyota RAV4 - Intake Manifold Runner Control Stuck Closed Bank 1 - AutoCodes.com — P2006 2013 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Closed Bank 1

What does this mean?

What are the Possible Causes of the DTC P2006 2013 Toyota RAV4?

Faulty Intake Air Control Valve Actuator (For Tumble Control Valve)
Intake Air Control Valve Actuator harness is open or shorted
Intake Air Control Valve Actuator circuit poor electrical connection
Faulty Intake manifold
Faulty Engine Control Module (ECM)

How to Fix the DTC P2006 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2006 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2006 2013 Toyota RAV4 code?

Need more information on how to fix the P2006 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2006 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2006 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2006 in a 2013 Toyota RAV4?

The common symptoms of code P2006 (Intake Manifold Runner Control Stuck Closed Bank 1) in a 2013 Toyota RAV4 include poor engine performance, reduced fuel efficiency, and the Check Engine Light illuminating on the dashboard.

2. What are the possible causes of the Intake Manifold Runner Control being stuck closed in a 2013 Toyota RAV4?

Common causes of the intake manifold runner control being stuck closed in a 2013 Toyota RAV4 include a faulty intake manifold runner control actuator, carbon buildup in the intake manifold, a vacuum leak, or a damaged wiring harness.

3. How can I diagnose OBDII code P2006 in my 2013 Toyota RAV4?

Diagnosing code P2006 in a 2013 Toyota RAV4 typically involves using an OBDII scanner to retrieve the fault code, conducting a visual inspection of the intake manifold components, checking for vacuum leaks, and testing the intake manifold runner control actuator.

4. Can I drive my 2013 Toyota RAV4 with OBDII code P2006?

While it may be possible to drive your 2013 Toyota RAV4 with code P2006, it is not recommended. Continuing to drive with a faulty intake manifold runner control can lead to decreased engine performance and potential damage to other engine components.

5. How can I repair OBDII code P2006 in my 2013 Toyota RAV4?

Repairing code P2006 in a 2013 Toyota RAV4 may involve replacing the intake manifold runner control actuator, cleaning out any carbon buildup in the intake manifold, repairing any vacuum leaks, or addressing any issues with the wiring harness.

6. Will resetting the Check Engine Light fix OBDII code P2006 in my 2013 Toyota RAV4?

Simply resetting the Check Engine Light will not fix code P2006 in a 2013 Toyota RAV4. It is important to diagnose the underlying issue causing the fault code and address it properly to prevent further problems.

7. How much does it cost to repair OBDII code P2006 in a 2013 Toyota RAV4?

The cost to repair code P2006 in a 2013 Toyota RAV4 can vary depending on the specific cause of the issue and the labor rates in your area. Costs may include parts such as the intake manifold runner control actuator and potential labor charges.

8. Can a DIY enthusiast fix OBDII code P2006 in a 2013 Toyota RAV4?

While some aspects of diagnosing and repairing code P2006 may be possible for a DIY enthusiast, it is recommended to have a professional mechanic perform a thorough diagnosis and repair to ensure the issue is properly resolved.

9. How urgent is it to address OBDII code P2006 in a 2013 Toyota RAV4?

It is recommended to address code P2006 in a 2013 Toyota RAV4 as soon as possible to prevent potential damage to the engine and ensure optimal performance and fuel efficiency of the vehicle.

10. Can OBDII code P2006 cause other issues in my 2013 Toyota RAV4?

If left unaddressed, code P2006 in a 2013 Toyota RAV4 can lead to decreased engine performance, reduced fuel efficiency, and potential damage to other engine components over time. It is important to diagnose and repair the issue promptly.