P2006 2011 Toyota Camry Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2011 Toyota Camry indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2011 Toyota Camry Description
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.
What are the Possible Causes of the DTC P2006 2011 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2011 Toyota Camry code?
Need more information on how to fix the P2006 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2011 Toyota Camry Code
What does the OBDII code P2006 mean for a 2011 Toyota Camry?
P2006 indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, which may affect engine performance.
What are the common symptoms of code P2006 in a 2011 Toyota Camry?
Symptoms may include reduced engine power, rough idling, decreased fuel efficiency, and an illuminated check engine light.
What causes the Intake Manifold Runner Control to get stuck closed?
Common causes include carbon buildup on the intake manifold, a malfunctioning IMRC actuator, a faulty IMRC solenoid, or issues with the wiring or connectors.
Can I drive my 2011 Toyota Camry with a P2006 code?
While the car may still be drivable, it’s not recommended to ignore the issue as it can lead to reduced performance and potentially damage other engine components over time.
How do I diagnose the P2006 code on my 2011 Toyota Camry?
Diagnosis typically involves scanning for additional codes, visually inspecting the IMRC system, checking for carbon buildup, and testing the actuator and related components for proper function.
What tools are needed to repair a P2006 issue in a 2011 Toyota Camry?
You may need an OBDII scanner, basic hand tools, a multimeter, and possibly cleaning supplies to remove carbon buildup.
How can I fix the P2006 code on my 2011 Toyota Camry?
Repairs may involve cleaning the intake manifold, replacing the IMRC actuator or solenoid, repairing damaged wiring, or replacing the intake manifold if necessary.
How much does it cost to fix the P2006 code on a 2011 Toyota Camry?
Costs can vary widely depending on the cause, but repairs typically range from $200 to $600, with higher costs if the intake manifold needs replacement.
Can a dirty air filter cause the P2006 code?
While a dirty air filter can affect engine performance, it is unlikely to directly cause the P2006 code, which is specific to the IMRC system.
How can I prevent the P2006 code from occurring again?
Regular maintenance, such as cleaning the intake manifold and ensuring proper operation of the IMRC system, can help prevent this issue from reoccurring.
Discuss the causes and fixes for P2006 2011 Toyota Camry OBDII Code
Code P2006 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
