P2006 2008 Ford Fusion Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2008 Ford Fusion indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2008 Ford Fusion Description
What are the Possible Causes of the DTC P2006 2008 Ford Fusion?
- Faulty Intake Manifold Runner Control (IMRC) Solenoid
- Intake Manifold Runner Control Solenoid is open or shorted
- Intake Manifold Runner Control Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2006 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2008 Ford Fusion code?
Need more information on how to fix the P2006 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P2006 on a 2008 Ford Fusion?
The common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and the check engine light illuminated on the dashboard.
2. What does the OBDII code P2006 "Intake Manifold Runner Control Stuck Closed Bank 1" mean for a 2008 Ford Fusion?
This code indicates that the intake manifold runner control is stuck in the closed position on bank 1 of the engine, affecting air intake and engine performance.
3. What are the possible causes of the intake manifold runner control being stuck closed on a 2008 Ford Fusion?
Common causes include a faulty intake manifold runner control actuator, carbon buildup in the intake manifold, wiring issues, or a vacuum leak in the intake system.
4. How can I diagnose the issue causing OBDII code P2006 on my 2008 Ford Fusion?
Diagnosing the problem may involve visually inspecting the intake manifold runner control system, checking for vacuum leaks, testing the actuator, and using a scan tool to monitor sensor data.
5. Can I drive my 2008 Ford Fusion with the intake manifold runner control stuck closed?
It is not recommended to drive the vehicle with this issue as it can lead to further engine damage and decreased performance. It is best to address the problem promptly.
6. What are the repair options for fixing OBDII code P2006 on a 2008 Ford Fusion?
Repair options may include cleaning the intake manifold, replacing the intake manifold runner control actuator, repairing any wiring issues, or addressing vacuum leaks in the system.
7. Will resetting the check engine light make OBDII code P2006 go away on a 2008 Ford Fusion?
Resetting the check engine light may temporarily turn it off, but the underlying issue causing the code will still exist. It is important to diagnose and repair the problem to prevent it from recurring.
8. Is it possible to prevent OBDII code P2006 from occurring on a 2008 Ford Fusion?
Regular maintenance, such as cleaning the intake system and replacing air filters, can help prevent carbon buildup and other issues that may lead to the intake manifold runner control getting stuck closed.
9. How much does it typically cost to repair OBDII code P2006 on a 2008 Ford Fusion?
The cost of repairing this issue can vary depending on the exact cause of the problem, but it may range from a few hundred to over a thousand dollars, including parts and labor.
10. Can a DIY enthusiast fix OBDII code P2006 on a 2008 Ford Fusion?
While some aspects of the repair, such as cleaning the intake manifold, may be possible for a DIY enthusiast, diagnosing and replacing components like the intake manifold runner control actuator may require professional expertise and tools.
Discuss the causes and fixes for P2006 2008 Ford Fusion OBDII Code
Code P2006 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
