P2006 2007 Toyota Camry Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Valve (IMRV) system is mounted on the intake manifold and consists of the intake manifold runner valve (IMRV), the IMRV motor and the IMRV position sensor. Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2007 Toyota Camry indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Intake Manifold Runner Valve Binding Or Sticking, Intake Manifold Runner Valve, Vacuum Line Cracked or Broken (Vacuum Leak).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2007 Toyota Camry Description
The IMRV has a groove on its upper portion.
When the IMRV is closed, air flows through a groove into the cylinder from the intake manifold, so that a dynamic air flow or ”tumble” air flow is generated in the cylinder. The tumble air flow drastically reduces fuel deposits inside the intake air port and the combustion wall surface inside the cylinder. This improves the combustion efficiency by boosting the air−fuel mixture and air flow turbulence.
What are the Possible Causes of the DTC P2006 2007 Toyota Camry?
- Intake Manifold Runner Valve Binding Or Sticking
- Intake Manifold Runner Valve
- Vacuum Line Cracked or Broken (Vacuum Leak)
- Intake Manifold Runner Position Sensor 1 or Wiring
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2006 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2007 Toyota Camry code?
Need more information on how to fix the P2006 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2007 Toyota Camry Code
What does the OBDII code P2006 mean for a 2007 Toyota Camry?
P2006 indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, causing improper air intake during engine operation.
What are the common symptoms of code P2006 in a 2007 Toyota Camry?
Symptoms may include reduced engine performance, poor fuel efficiency, an illuminated Check Engine Light, and rough idling.
What causes the P2006 code to appear in a 2007 Toyota Camry?
Common causes include a malfunctioning intake manifold runner control solenoid, carbon buildup in the intake system, a stuck runner flap, or a wiring issue.
Can driving with code P2006 damage my 2007 Toyota Camry?
While it may not cause immediate damage, prolonged driving with this code could lead to reduced engine efficiency and potential long-term engine wear.
How do I diagnose the P2006 code on a 2007 Toyota Camry?
Diagnosis involves inspecting the intake manifold runner control system for damage, checking for carbon buildup, and testing the IMRC solenoid and wiring for proper functionality.
What tools are needed to fix the P2006 code on a 2007 Toyota Camry?
You may need a scan tool, a multimeter, basic hand tools, and possibly cleaning supplies to remove carbon buildup from the intake system.
How much does it cost to repair the P2006 code on a 2007 Toyota Camry?
Repair costs can vary but typically range from $100 to $500, depending on whether cleaning or part replacement (like the IMRC actuator) is required.
Can I fix the P2006 code on my 2007 Toyota Camry myself?
If you have basic mechanical skills, you can attempt cleaning the intake system or replacing the IMRC solenoid, but complex repairs may require professional assistance.
How can I prevent the P2006 code from occurring again on my 2007 Toyota Camry?
Regular maintenance, including cleaning the intake system and ensuring proper operation of the IMRC components, can help prevent the code from recurring.
What is the intake manifold runner control, and why is it important?
The intake manifold runner control adjusts airflow into the engine for optimal performance and fuel efficiency. If it’s stuck, engine performance may suffer.
Discuss the causes and fixes for P2006 2007 Toyota Camry OBDII Code
Code P2006 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
