P2006 2007 Ford Fusion Code - Intake Manifold Runner Control Stuck Closed Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2006 2007 Ford Fusion indicates Intake Manifold Runner Control Stuck Closed Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2006 2007 Ford Fusion Description
What are the Possible Causes of the DTC P2006 2007 Ford Fusion?
- Faulty Intake Manifold Runner Control (IMRC) Solenoid
- Intake Manifold Runner Control Solenoid is open or shorted
- Intake Manifold Runner Control Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2006 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2006 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2006 2007 Ford Fusion code?
Need more information on how to fix the P2006 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2006 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2006 2007 Ford Fusion Code
1. What does the OBDII code P2006 mean for a 2007 Ford Fusion?
The P2006 code indicates that the Intake Manifold Runner Control (IMRC) for Bank 1 is stuck in the closed position, which can affect engine airflow and performance.
2. What are the common symptoms of a P2006 code in a 2007 Ford Fusion?
Symptoms may include reduced engine performance, poor fuel economy, rough idling, lack of power, and the Check Engine Light being illuminated.
3. What causes the P2006 code on a 2007 Ford Fusion?
Common causes include a malfunctioning IMRC actuator, carbon buildup on the intake manifold runner, a broken or disconnected linkage, or a wiring/connector issue in the IMRC system.
4. Can you drive a 2007 Ford Fusion with the P2006 code?
While the car may still be drivable, it is not recommended to ignore the issue because it can lead to reduced performance, increased emissions, and potential damage to the engine over time.
5. How is the P2006 code diagnosed on a 2007 Ford Fusion?
A mechanic will typically inspect the IMRC system's actuator, linkage, and wiring; check for carbon buildup; and use a scan tool to monitor IMRC operation and confirm the fault.
6. How can you fix the P2006 code on a 2007 Ford Fusion?
Possible fixes include cleaning carbon deposits from the intake manifold, repairing or replacing the IMRC actuator, fixing broken linkages, or addressing wiring/connector issues.
7. How much does it cost to repair the P2006 code on a 2007 Ford Fusion?
Repair costs can vary widely depending on the exact issue but typically range from $150 to $600, including parts and labor.
8. What happens if the P2006 code is not resolved?
Ignoring the P2006 code can lead to poor engine performance, increased emissions, and potential long-term damage to the intake or engine components.
9. Does the P2006 code indicate a serious problem?
While not immediately critical, it is important to address this code promptly to prevent further issues with engine efficiency and performance.
10. Can a dirty air filter cause the P2006 code on a 2007 Ford Fusion?
No, a dirty air filter is not a typical cause of the P2006 code, as it specifically relates to the Intake Manifold Runner Control system.
Discuss the causes and fixes for P2006 2007 Ford Fusion OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
