P2004 2013 Toyota RAV4 Code - Intake Manifold Runner Control Stuck Open Bank 1
Quick Answer
The Tumble Control Valve (TCV) is built into the intake manifold. Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2004 2013 Toyota RAV4 indicates Intake Manifold Runner Control Stuck Open Bank 1.
- Common causes
- Common causes include Faulty Intake Air Control Valve Actuator (For Tumble Control Valve), Intake Air Control Valve Actuator harness is open or shorted, Intake Air Control Valve Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2004 2013 Toyota RAV4 Description
When the tumble control valve is closed, the intake air tumble flow intensifies, and negative pressure is generated between the tumble control valve and intake valve which atomizes the fuel. Combustion is enhanced and exhaust gas emissions are reduced at low temperatures.
When the ECM has requested a tumble control valve close operation but the actual tumble control valve opening angle is 17 deg. or more for 10 seconds, Diagnostic Trouble Code (DTC) P2004 is stored.
What are the Possible Causes of the DTC P2004 2013 Toyota RAV4?
- Faulty Intake Air Control Valve Actuator (For Tumble Control Valve)
- Intake Air Control Valve Actuator harness is open or shorted
- Intake Air Control Valve Actuator circuit poor electrical connection
- Faulty Intake manifold
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2004 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2004 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2004 2013 Toyota RAV4 code?
Need more information on how to fix the P2004 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2004 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2004 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2004 on a 2013 Toyota RAV4?
When the Intake Manifold Runner Control is stuck open on Bank 1 in a 2013 Toyota RAV4, common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and an illuminated Check Engine Light.
2. What can cause the Intake Manifold Runner Control to get stuck open on Bank 1 in a 2013 Toyota RAV4?
The intake manifold runner control can get stuck open due to carbon buildup, a faulty intake manifold runner control valve, a vacuum leak, or issues with the intake manifold itself.
3. How serious is OBDII code P2004 on a 2013 Toyota RAV4?
While the vehicle may still be operable with the intake manifold runner control stuck open, it is advisable to address the issue promptly to prevent further damage to the engine and ensure optimal performance.
4. Can I continue driving my 2013 Toyota RAV4 with OBDII code P2004?
It is generally not recommended to continue driving the vehicle with this code present, as it can lead to decreased fuel efficiency and potential long-term engine problems. It is best to address the issue as soon as possible.
5. How can I repair OBDII code P2004 on my 2013 Toyota RAV4?
Repair options for this code may include cleaning the intake manifold, replacing the intake manifold runner control valve, fixing any vacuum leaks, or addressing other underlying issues causing the intake manifold runner control to stick open.
6. Can I reset the Check Engine Light after fixing OBDII code P2004 on my 2013 Toyota RAV4?
Once the underlying issue causing the code has been resolved, the Check Engine Light can be reset using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
7. Is it possible to prevent OBDII code P2004 from occurring on a 2013 Toyota RAV4?
Regular maintenance, such as cleaning the intake system and using high-quality fuel, can help prevent carbon buildup and other issues that may lead to the intake manifold runner control getting stuck open.
8. Will OBDII code P2004 cause permanent damage to my 2013 Toyota RAV4?
If left unaddressed for an extended period, OBDII code P2004 could potentially cause damage to the engine over time. It is best to diagnose and repair the issue promptly to avoid any long-term consequences.
9. How long does it typically take to repair OBDII code P2004 on a 2013 Toyota RAV4?
The repair time can vary depending on the exact cause of the issue. Simple fixes like cleaning the intake system may take less time, while more complex repairs such as replacing components could require more time.
10. Can a DIY enthusiast fix OBDII code P2004 on a 2013 Toyota RAV4?
While some aspects of addressing this code may be suitable for DIY enthusiasts, it is recommended to consult a professional mechanic for an accurate diagnosis and proper repair to ensure the issue is fully resolved.
Discuss the causes and fixes for P2004 2013 Toyota RAV4 OBDII Code
Code P2004 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
