P2004 2007 Ford Fusion Code - Intake Manifold Runner Control Stuck Open Bank 1
Quick Answer
The Intake Manifold Runner Control (IMRC) is an electrically actuated system consisting of a motorized actuator with an attaching linkage for each housing on each bank. Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2004 2007 Ford Fusion indicates Intake Manifold Runner Control Stuck Open Bank 1.
- Common causes
- Common causes include Faulty Intake Manifold Runner Control (IMRC) Solenoid, Intake Manifold Runner Control Solenoid is open or shorted, Intake Manifold Runner Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2004 2007 Ford Fusion Description
What are the Possible Causes of the DTC P2004 2007 Ford Fusion?
- Faulty Intake Manifold Runner Control (IMRC) Solenoid
- Intake Manifold Runner Control Solenoid is open or shorted
- Intake Manifold Runner Control Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2004 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2004 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2004 2007 Ford Fusion code?
Need more information on how to fix the P2004 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2004 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2004 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P2004 on a 2007 Ford Fusion?
The common symptoms of code P2004 include rough idling, decreased engine performance, and the illumination of the check engine light.
2. What does the OBDII code P2004 "Intake Manifold Runner Control Stuck Open Bank 1" mean for a 2007 Ford Fusion?
This code indicates that the intake manifold runner control is stuck in the open position on bank 1 of the engine, affecting the air flow and potentially causing performance issues.
3. What are the possible causes of the intake manifold runner control being stuck open on a 2007 Ford Fusion?
Common causes of this issue include a faulty intake manifold runner control actuator, carbon buildup in the intake manifold, vacuum leaks, or electrical issues.
4. How can I diagnose the cause of OBDII code P2004 on my 2007 Ford Fusion?
Diagnosing this code may involve visually inspecting the intake manifold components, checking for vacuum leaks, testing the intake manifold runner control actuator, and using a scan tool to monitor sensor data.
5. Can I continue driving my 2007 Ford Fusion with OBDII code P2004?
It is not recommended to drive with code P2004 unresolved, as it can lead to further engine damage and decreased fuel efficiency. It's best to address the issue promptly.
6. What repairs are typically needed to fix OBDII code P2004 on a 2007 Ford Fusion?
Repairs may involve replacing the intake manifold runner control actuator, cleaning out carbon deposits from the intake manifold, fixing any vacuum leaks, or addressing electrical issues.
7. How much does it cost to repair OBDII code P2004 on a 2007 Ford Fusion?
The cost of repairs for this code can vary depending on the underlying issue, but it may range from $200 to $600 or more, including parts and labor.
8. Can I reset the check engine light after fixing OBDII code P2004 on my 2007 Ford Fusion?
Yes, you can reset the check engine light using an OBDII scanner after the issue causing code P2004 has been repaired. This will clear the code and turn off the light.
9. How can I prevent OBDII code P2004 from occurring again on my 2007 Ford Fusion?
Regular maintenance, such as keeping the intake system clean, replacing air filters as recommended, and addressing any engine issues promptly, can help prevent code P2004 from reoccurring.
10. Is OBDII code P2004 a common issue in 2007 Ford Fusion vehicles?
While not extremely common, OBDII code P2004 can occur in 2007 Ford Fusion vehicles, especially as they age and accumulate mileage. Regular maintenance and inspections can help prevent this issue.
Discuss the causes and fixes for P2004 2007 Ford Fusion OBDII Code
-
What engine size on your Fusion?
Here is a video for the 2.3L that may help you:
https://www.youtube.com/wat...
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
