P1F64 GMC Code - Hybrid/EV System Voltage Discharge Circuit Low Voltage
Quick Answer
This is an internal fault detection of the power inverter module, often referred to as the drive motor generator power inverter module. Common causes include Faulty Power Inverter Module, Power Inverter Module harness is open or shorted, Power Inverter Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1F64 GMC indicates Hybrid/EV System Voltage Discharge Circuit Low Voltage.
- Common causes
- Common causes include Faulty Power Inverter Module, Power Inverter Module harness is open or shorted, Power Inverter Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1F64 GMC Description
What are the Possible Causes of the DTC P1F64 GMC?
- Faulty Power Inverter Module
- Power Inverter Module harness is open or shorted
- Power Inverter Module circuit poor electrical connection
How to Fix the DTC P1F64 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1F64 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1F64 GMC code?
Need more information on how to fix the P1F64 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1F64 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1F64 GMC Code
1. What are the common symptoms of OBDII code P1F64 in a GMC Hybrid/EV system?
- Common symptoms include reduced power, poor acceleration, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What are the possible causes of the Hybrid/EV System Voltage Discharge Circuit Low Voltage code in a GMC vehicle?
- Possible causes include a faulty high voltage battery, issues with the battery management system, corroded electrical connections, or a malfunctioning hybrid control module.
3. How can I diagnose the P1F64 code in my GMC Hybrid/EV system?
- Diagnosing the code typically involves using a diagnostic scanner to retrieve the specific fault codes, inspecting the high voltage battery and related components, and testing the electrical connections for proper voltage levels.
4. What are the potential dangers of driving with the P1F64 code present in a GMC Hybrid/EV vehicle?
- Driving with this code can lead to further damage to the hybrid system components, potential safety hazards, and may result in the vehicle entering a reduced power or limp mode.
5. Can I repair the Hybrid/EV System Voltage Discharge Circuit Low Voltage issue in my GMC vehicle myself?
- Unless you have experience working with high voltage systems and specialized hybrid vehicle knowledge, it is recommended to have a professional technician diagnose and repair the issue to ensure safety and proper repair.
6. Is it safe to continue driving my GMC Hybrid/EV vehicle with the P1F64 code if the symptoms are not severe?
- It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the hybrid system components and potentially cause safety issues while driving.
7. How much does it typically cost to repair the Hybrid/EV System Voltage Discharge Circuit Low Voltage code in a GMC vehicle?
- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the high voltage battery, repairing electrical connections, or reprogramming the hybrid control module, which can range from a few hundred to several thousand dollars.
8. Can extreme weather conditions or temperature changes trigger the P1F64 code in a GMC Hybrid/EV system?
- Yes, extreme temperatures or weather conditions can sometimes affect the performance of the high voltage battery and trigger the code due to voltage fluctuations and reduced efficiency in the hybrid system.
9. Are there any preventive maintenance tips to avoid the Hybrid/EV System Voltage Discharge Circuit Low Voltage issue in a GMC vehicle?
- Regularly inspecting the high voltage battery, keeping electrical connections clean and well maintained, and following the manufacturer's recommended maintenance schedule can help prevent this issue from occurring.
10. Will resetting the OBDII code P1F64 in my GMC Hybrid/EV system make the issue go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed and repaired, the code is likely to reappear. It is important to diagnose and fix the root cause of the problem to resolve it permanently.
Discuss the causes and fixes for P1F64 GMC OBDII Code
Code P1F64 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
