P1F0B GMC - A/C Compressor Motor Start-Up Current Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty A/C Compressor
  • A/C Compressor harness is open or shorted
  • A/C Compressor circuit poor electrical connection

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1f0b Gmc Description

The AC compressor function is to provide refrigerant flow in the AC refrigerant loop to help cool down the cabin, help dehumidify the air in a defrost mode and help maintain the battery temperature. Rather than a more typical pulley, the A/C compressor uses a 3-phase alternating current, high voltage electric motor to operate. It has an on-board inverter that takes High Voltage direct current from the vehicle's High voltage battery and inverts it to alternating current for the motor. The AC compressor shall be activated when any of the three following events occur:

- The customer pushes the AC button

- The HVAC control, in AUTO mode, requests the electric AC compressor on to help in cooling the cabin or removing moisture in the defrost mode

- The High Voltage Battery Thermal System requests the AC compressor on to help maintain the battery temperature

The Hybrid/EV Powertrain Control Module 2 uses values from the A/C refrigerant pressure transducers, A/C refrigerant thermistor, duct temperature sensors, ambient air temperature sensor, passenger compartment temperature sensor, evaporator temperature sensor, battery cell temperature sensors, battery coolant temperature sensors and battery coolant pumps to determine the speed at which the compressor will operate. This message is sent from the Hybrid/EV Powertrain Control Module 2 to the A/C compressor control module via serial data message.

AC Compressor has a motor start up procedure that can take a variable length of time to run to bring the motor up to requested speed. Length of time is dependent on external conditions such as under-bonnet temperature and high side pressure. In hotter conditions, the motor start up time will be longer. The A/C compressor control module monitors an internal parameter known as the DC link current which is based off DC input current. It is not possible to measure this parameter externally.

OBDII Code P1f0b Gmc - A/C Compressor Motor Start-Up Current Performance - AutoCodes.com

Need more help?

Get the P1f0b Gmc code diagnosed by a professional: Find a repair shop in your area

Related Information

P1F0B GMC Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1f0b Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧