P1F08 Buick Code - Hybrid/EV Battery Interface Control Module 3 Processor Performance
Quick Answer
The Hybrid/EV Battery Interface Control Module will diagnose its own systems and determine when a fault condition is present. Common causes include Faulty Hybrid/EV Battery Interface Control Module, Hybrid/EV Battery Interface Control Module harness is open or shorted, Hybrid/EV Battery Interface Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1F08 Buick indicates Hybrid/EV Battery Interface Control Module 3 Processor Performance.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Interface Control Module, Hybrid/EV Battery Interface Control Module harness is open or shorted, Hybrid/EV Battery Interface Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1F08 Buick Description
What are the Possible Causes of the DTC P1F08 Buick?
- Faulty Hybrid/EV Battery Interface Control Module
- Hybrid/EV Battery Interface Control Module harness is open or shorted
- Hybrid/EV Battery Interface Control Module circuit poor electrical connection
How to Fix the DTC P1F08 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1F08 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1F08 Buick code?
Need more information on how to fix the P1F08 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1F08 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1F08 Buick Code
What does OBDII code P1F08 mean for a Buick?
Code P1F08 indicates an issue with the Hybrid/EV Battery Interface Control Module 3 Processor Performance, meaning there may be a fault in the communication or operation of this specific control module.
What are the common symptoms of code P1F08 in a Buick?
Common symptoms include a check engine light, reduced hybrid or EV performance, limited driving range, or the vehicle entering limp mode.
What causes the P1F08 code to appear in a Buick?
Possible causes include a malfunctioning control module, wiring or connection issues, software glitches, or a failure in the hybrid/EV battery system.
Can I drive my Buick with the P1F08 code?
While the car may remain drivable, it’s not recommended to ignore this issue as it could lead to reduced performance or further damage to the hybrid/EV system.
How is the P1F08 code diagnosed?
A technician will use a scan tool to read the code, inspect the battery interface control module, check wiring and connections, and test the hybrid/EV battery system for faults.
What repairs are needed to fix code P1F08 on a Buick?
Repairs may involve reprogramming or replacing the control module, repairing damaged wiring, updating software, or addressing issues with the hybrid/EV battery.
How much does it cost to repair the P1F08 code in a Buick?
The cost varies but may range from $300 to $1,500, depending on whether the control module needs replacement or reprogramming and if additional repairs are required.
Can a dead 12V battery trigger the P1F08 code?
It’s unlikely, though a weak or failing 12V battery can sometimes cause communication issues. Testing the 12V battery is a good starting point.
Is code P1F08 specific to Buicks, or can it occur in other cars?
While it is more commonly associated with Buick hybrid/EV models, similar codes can appear in other GM vehicles using the same hybrid/EV systems.
Can I clear the P1F08 code without repairs?
Clearing the code without addressing the root cause may temporarily remove it, but the issue is likely to return unless proper repairs are made.
Discuss the causes and fixes for P1F08 Buick OBDII Code
Code P1F08 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
