P1E7A GMC Code - Hybrid/Electric Vehicle Battery 79 Circuit

The Hybrid/Electric Vehicle battery pack contains 288 cells. Groups of three cells are welded together in parallel. There are a total of 96 cell groups in the hybrid/EV battery pack assembly. These cell groups are electrically connected in-series. Each individual cell group is rated at 3.7 V, for a nominal system voltage of 355 V direct current. The battery cells are also grouped together into three sections. The first 90 cells/30 cell groups make up battery section one. This section is adjacent to the cowl and contains batteries 67 through to 96. Battery section two is located behind section one. It is made up of 72 cells/24 cell groups and contains batteries 43 through to 66. The transverse battery section is section number three, it is made up of the remaining 126 cells/42 cell groups and contains batteries 1 through to 42. The three battery sections are individually serviceable components.
The battery energy control module monitors the voltage of the 96 battery cell groups through the four hybrid/EV battery interface control modules. Voltage sense circuits are attached to each individual cell group, and these sense circuits terminate at a connector located on the top surface of the battery section. A serviceable auxiliary battery wiring harness joins this connector to a hybrid/EV battery interface control module, also located on the top surface of the battery section. The hybrid/EV battery interface control module encodes the voltage reading and transmits it to the battery energy control module through the battery control harness. There is one hybrid/EV battery interface control module located on battery sections one and two, and two hybrid/EV battery interface control modules associated with battery section three. The hybrid/EV battery interface control module, battery energy control module wiring harness, auxiliary battery wiring harness, and battery energy control module are all considered serviceable components.
The battery energy control module will determine when a fault condition is present. Diagnostics and system status are communicated from the battery energy control module to hybrid/EV powertrain control module 2 through serial data. The hybrid/EV powertrain control module 2 is the host controller for diagnostic trouble code information.

• Faulty Hybrid/Electric Vehicle Battery Pack
• Faulty Hybrid/Electric Vehicle Battery Interface Control Module