AutoCodes – Acura – P1E4F Acura

P1E4F Acura Code - Motor Angle Signal Malfunction

Quick Answer

The Engine Control Module (ECM) monitors the Electric Servo Brake Control Unit. Common causes include Faulty Electric Servo Brake Control Unit, Electric Servo Brake Control Unit harness is open or shorted, Electric Servo Brake Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1E4F Acura indicates Motor Angle Signal Malfunction.
Common causes
Common causes include Faulty Electric Servo Brake Control Unit, Electric Servo Brake Control Unit harness is open or shorted, Electric Servo Brake Control Unit circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 972
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 24, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1E4F Acura Description

The Engine Control Module (ECM) monitors the Electric Servo Brake Control Unit. The ECM sets the OBDII code when the Electric Servo Brake Control Unit is not to factory specifications.
OBDII Code P1E4F Acura - Motor Angle Signal Malfunction - AutoCodes.com
P1E4F Acura Code - Motor Angle Signal Malfunction

What are the Possible Causes of the DTC P1E4F Acura?

  • Faulty Electric Servo Brake Control Unit
  • Electric Servo Brake Control Unit harness is open or shorted
  • Electric Servo Brake Control Unit circuit poor electrical connection

How to Fix the DTC P1E4F Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1E4F Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1E4F Acura code?

Need more information on how to fix the P1E4F Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1E4F Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1E4F Acura Code

1. What does the OBDII code P1E4F mean on an Acura?

P1E4F indicates a "Motor Angle Signal Malfunction," which means the vehicle's control module has detected an issue with the motor angle sensor or its signal.

2. What are the common symptoms of a P1E4F code?

Symptoms may include poor acceleration, reduced fuel efficiency, the vehicle entering limp mode, or the illumination of the check engine light.

3. What causes the P1E4F code to appear on an Acura?

Common causes include a faulty motor angle sensor, wiring issues such as damaged or corroded connectors, or a malfunction in the powertrain control module (PCM).

4. Can driving with a P1E4F code cause further damage?

Yes, driving with this code can lead to additional damage to the hybrid or electric motor system and may compromise vehicle performance or safety.

5. How can I diagnose the P1E4F code on my Acura?

Start by scanning the vehicle with an OBDII scanner to confirm the code, then inspect the motor angle sensor, wiring, and connectors for damage or corrosion.

6. How do I fix the P1E4F code on my Acura?

Repair steps may include replacing the motor angle sensor, repairing or replacing damaged wiring, or reprogramming/updating the PCM if necessary.

7. How much does it cost to fix a P1E4F code?

The repair cost varies depending on the cause but can range from $150 to $500 for sensor replacement or wiring repairs. PCM-related repairs may cost more.

8. Can I clear the P1E4F code without fixing the problem?

Clearing the code without addressing the underlying issue will likely result in the code reappearing and may risk further damage.

9. Is the P1E4F code specific to Acura vehicles?

While P1E4F is most commonly associated with Acura hybrid models, similar codes may appear in other manufacturers' vehicles with hybrid or electric systems.

10. Do I need professional help to fix the P1E4F code?

If you're not experienced with diagnosing or repairing hybrid systems, it's recommended to seek help from a certified technician, as these systems require specialized knowledge and tools.

Discuss the causes and fixes for P1E4F Acura OBDII Code

Code P1E4F Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play