P1E4A Acura Code - Slave Cylinder Drive Motor Current Malfunction Over Current
Quick Answer
The Engine Control Module (ECM) monitors the Slave Cylinder Drive Motor. Common causes include Faulty Electric Servo Brake Control Unit, Electric Servo Brake Control Unit harness is open or shorted, Electric Servo Brake Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1E4A Acura indicates Slave Cylinder Drive Motor Current Malfunction Over Current.
- Common causes
- Common causes include Faulty Electric Servo Brake Control Unit, Electric Servo Brake Control Unit harness is open or shorted, Electric Servo Brake Control Unit circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1E4A Acura Description
What are the Possible Causes of the DTC P1E4A Acura?
- Faulty Electric Servo Brake Control Unit
- Electric Servo Brake Control Unit harness is open or shorted
- Electric Servo Brake Control Unit circuit poor electrical connection
How to Fix the DTC P1E4A Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1E4A Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1E4A Acura code?
Need more information on how to fix the P1E4A Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1E4A Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1E4A Acura Code
1. What does the OBDII code P1E4A mean on an Acura?
The P1E4A code indicates a "Slave Cylinder Drive Motor Current Malfunction Over Current," meaning the drive motor for the slave cylinder is experiencing an electrical overload.
2. What are the common symptoms of the P1E4A code in an Acura?
Symptoms may include difficulty shifting gears, reduced vehicle performance, transmission warning lights, or the vehicle entering limp mode.
3. What causes the P1E4A code to appear in an Acura?
This code is typically caused by a faulty slave cylinder drive motor, damaged wiring, corroded electrical connectors, or excessive resistance in the motor circuit.
4. Can I drive my Acura with the P1E4A code?
Driving with the P1E4A code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to shifting issues.
5. How is the P1E4A code diagnosed?
A technician will inspect the slave cylinder drive motor, check wiring and connectors for damage, and measure current flow to identify any over-current conditions.
6. What repairs are needed to fix the P1E4A code?
Repairs may include replacing the slave cylinder drive motor, repairing or replacing damaged wiring, cleaning corroded connectors, or updating the vehicle’s software.
7. How much does it cost to repair the P1E4A code in an Acura?
Repair costs can vary, but replacing a slave cylinder drive motor typically ranges from $300 to $800, depending on labor and parts availability.
8. Can a blown fuse cause the P1E4A code in an Acura?
A blown fuse is unlikely to trigger this specific code, but a related electrical issue, such as a short circuit, could cause an over-current condition.
9. Is the P1E4A code specific to certain Acura models?
This code is most often seen in Acura models with advanced automated or dual-clutch transmissions, but specific applicability depends on the vehicle.
10. Will clearing the P1E4A code fix the problem?
Clearing the code may turn off the warning light temporarily, but the root cause must be repaired to prevent the code from returning.
Discuss the causes and fixes for P1E4A Acura OBDII Code
Code P1E4A Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
